Toshiba-Viamo-Sd730-417end-A

[Page 1] SD730-417END*A 640A 640A 640A -640A - - SSA SSA- SSA SSA

[Page 2] R E V I S I O N R E V I S I O N R E V I S I O N R E V I S I O N R E C O R D R E C O R D R E C O R D R E C O R D DOC REV DATE REASON PAGE PRODUCT (MM/YY) /AUTHOR CHANGED INI 7/ ’ 09 Initial V1.20 / (S3) Mr.Mitobe --------- A 1/ ’ 10 V2.00, V2.10 / (S3) Mr.Mitobe ---------

[Page 3] 1080mm 550mm 550mm ： ： Width Height Depth Mass: 45kg (Include peripherals) Width: 350mm Height： 99mm Depth： 398mm * Only main unit Approx. 8.5kg * Main unit, Standard battery, Standard probe * Except AC adaptor *When with UZWT-640A (Pole cart) Dimension Mass (W/O Option) Model Name: Viamo SSA-640A Versatile imaging with advanced mobility The meaning of “Viamo” System overview

[Page 4] System appearance

[Page 5] Purpose Purpose Purpose Purpose Adult hart, Abdominal Adult hart, Abdominal Adult hart, Abdominal Adult hart, Abdominal Abdominal Abdominal Abdominal Abdominal Peripheral vascular, small organ Peripheral vascular, small organ Peripheral vascular, small organ Peripheral vascular, small organ Peripheral vascular, small organ Peripheral vascular, small organ Peripheral vascular, small organ Peripheral vascular, small organ Cardiac, abdominal Cardiac, abdominal Cardiac, abdominal Cardiac, abdominal - - - - - - - - - - - - - - - - - - - - - V2.0 V2.0- V2.0 V2.0 V2.0 V2.0- V2.0 V2.0 V2.0 V2.0- V2.0 V2.0 V2.0 V2.0- V2.0 V2.0 V2.0 V2.0- V2.0 V2.0 V2.0 V2.0- V2.0 V2.0 V2.0 V2.0- V2.0 V2.0 Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Initial release Applicable version Applicable version Applicable version Applicable version *1 *1 *1 *1 *1 *1 *1 *1 25ST 25ST 25ST -25ST - - 375ST 375ST 375ST 704ST 704ST 704ST -375ST - - -704ST - - 704AT *1 704AT *1 704AT *1 661VT *1 661VT *1 661VT *1 674BT *1 674BT *1 674BT *1 805AT 805AT 805AT 382BT 382BT 382BT 1204BT *1 1204BT *1 1204BT *1 - -661VT *1 - - -674BT *1 - - 705BTH *1 705BTH *1 705BTH *1 745BTV *1 745BTV *1 745BTV *1 350BTP *1 350BTP *1 350BTP *1 -704AT *1 - -805AT - - -382BT - - -1204BT *1 - - -705BTH *1 - - -745BTV *1 - - -350BTP *1 - - PST PST- PST PST PVT PVT- PVT PVT PLT PLT- PLT PLT But we need UITC-640A (Transducer adapter) to connect this probe. PLT PLT- PLT PLT PVT PVT- PVT PVT PVT PVT- PVT PVT PLT PLT- PLT PLT PVT PVT- PVT PVT PLT PLT- PLT PLT PLT PLT- PLT PLT PVT PVT- PVT PVT PVT PVT- PVT PVT Probe model name Probe model name Probe model name Probe model name *1: This probe common with Aplio / Xario series. Note Probe availability (V1.10)

[Page 6] t install to SD730 SD730- SD730 SD730 ’ V1.20: Only Storage Storage, MWM, MPPS (This option couldn V1.20 system.) version V1.20- V2.00- Model name USDI-640A USDI-641A/EL DICOM DICOM 1 2 3 4 5 6 7 No Software option

[Page 7] Standard Battery: 1.5 Hours High capacity Battery: 3 Hours 30 Minutes (Full charged under 2D mode.) 60 Minutes (Full charged under 2D mode.) Initial release: PLT-805AT, PVT-382BT UZWT-640A required This battery standard configuration of the system. Running time with standard battery: Running time with high capacity battery: This AC adaptor standard configuration of the system. Transducer adapter that connecting following probes. This option must be necessary to connect B/W printer. Isolation trans with filter, cable included High speed battery charger Battery charge time (Full charged): version V2.00- Initial release Initial release Initial release Initial release Initial release Initial release Initial release Model Name UZWT-640A UZWT-641A UEBP-640A UEBP-641A UEAA-640A UITC-640A UEPS-640A UEBC-640A Pole Cart AC Adaptor Tablet support Transducer Adapter Printer Support Kit Battery Pack (Standard) Battery Pack (High Capacity) High Speed Battery Charger 1 2 3 4 5 6 7 8 No Hardware option

[Page 8] ECG waveform generation unit ECG cable SSD unit Mounting parts SSD unit (V2.1 software installed) Mounting parts BKE PWB version V2.10- V2.10- V2.10- V1.20 or V2.00 Model Name UJUR-640A UIPS-640A UISD-640A UISD-641A ECG unit SSD unit SSD unit Transducer Selector No 10 11 12 Hardware option

[Page 9] UEPS-640A required. UEPS-640A required. version Initial release Initial release Model Name UP-D897(SONY) P95D (MITSUBISHI) B/W Printer 1 2 3 4 5 6 No Peripherals

[Page 10] to V2.0. to V2.1 Apr. 2009 released V1.1 to V1.2.. May. 2009 released V1.1 (or V1.2) Hardware upgrade kit. (HDD, metal plate, gasket) Nov. 2009 released V1.2 (or V2.0) Hardware upgrade kit. (HDD, metal plate, gasket) It is NOT include SSD unit --- serial number V1.1 V1.2 V2.0 V2.1 Version USBU-640A UIBU-640A UIBU-641A Initial release Version-up kit 1 2 3 4 5 6 7 No Version-up record

[Page 11] -417END*A - - LCD LCD LCD LCD LED+Sensor LMN LMN LMN LMN ” Service Note Service Note Service Note Service Note TCS TCS TCS TCS 15 15 15 15 Rear USB Port For B/W Printer 1024x768 ( XGA ) 1024x768 ( XGA ) 1024x768 ( XGA ) 1024x768 ( XGA ) CPN CPN CPN CPN PCN PCN PCN PCN (1port) To FTX +3.3V +12V +24V ±15V ±5.5V +23.5V STB+5V +0.125V to +18V USP UITC-640A PWS TXP CPM (MDP) FRX FTX Viamo Transducer BCN Common Transduser HDC (1.8 Power SW HDD CPT EPT FANR From TXP UZWT-640A Pole cart FANF BAT(Standard/High Capacity) ADP B/W UEPS-640A Isolation Trans Isolation Trans Isolation Trans Isolation Trans From USP Printer Printer Support Kit General block diagram

[Page 12] Service Note Service Note Service Note Service Note connector) SD021 CW007 CPM (CPU Module) USP (I/F for B/W printer) HDC (HDD connection cable and - If FRX detected temperature abnormality in any beam former, system will show error code - HDD on this PWB - This PWB included with BKE for service parts. - If the system detecting fanrotaion abnormality twice, system shows error. - On the BKE also include; Perform Dynamic Filter, Edge Enhancement etc. Doppler signal detection and audio processing Perform MTI filter, autocorrelation. Cable with PWB to connected PCN and FTX PWB to connected PCN and FRX - PTX(Probe connector for ｆTX): - PCR(Probe Connector for Receipt) - Generate transmitting pulse - Delay control for transmission focusing. - Transmitting voltage monitor - Probe ID receiving - Receiving echo signal from probe - Delay, addition, detection process for echo signal - A/D conversion for echo signal - Temperature monitoring for each beam former - In 2D / M: - In PW: - In CDI / POWER: - Transmission control - Output video signal for LCD and external monitor - Communication I/F for USB, Ethernet. - Communicate with CPN and control each unit. - Superimpose graphics and ultrasound image. - Image memory function. - DC voltage distribution. - Monitoring rotation of 5 fans. (1min interval) - Temperature monitoring for system. - Probe connector with following units BSM31- 9613 BSM31- 9614 N/A BSM31- 9615 BSM31- 9611 End E E D D D Name Nnector N N F Frontend F F TX TX TX TX Frontend RX M M i D M M P Process P P B BacK E B B P Probe P P C CoN C C PWB FTX FRX MDP BKE PCN A42 A44 A50 A60 A40 Function explanation (PWB)

[Page 13] +23.5V, +24V, -5V, -5.6V, STB+5V - Input: +24.5V - Output: +3.3V, +5V, +5.6V, +12V, - Output range: +0.125V - +18V - Input: AC100V - 127V, 220V - 240V - Output: DC 24V, 5.63A - DC voltage supplying to system. - On / Off circuit which liked with main system - 2 different transmitting voltage generateing from +24V power source from PWS. - DC supply for main unit and battery charger. - Connecting battery to main system. -Nickel-Metal Hybrid 6400mAh (Nominal Cpacity) +16.8V (Nominal Voltage) BSM31- 9601 BSM31- 9603 P Pter P P Power P Name Wer W W Nector N N P PoW P P S Supply S S TX TX P TX TX supply ac AD ADaP AD AD B Battery B B C CoN C C BAT BATery BAT BAT PWB PWS TXP ADP BCN BAT A03 A04 A05 A06 A07 Function explanation (Power Supply)

[Page 14] HDD/60GB (Initial product) Data signal connected to BKE (Future option) - 1.8 - HDD mounted on MDP PWB. through HDC PWB. - EPT is connector for ECG unit. - BKE monitoring FANR abnormality. - BKE monitoring FANF abnormality. - Monitor resolution: 1024x768 XGA - Video signal coming form BKE by LVDS signal. LMN convert it to DVI. - Touch panel signal communicate with BKE by USB I/F. - Panel and trackball / wheel control signal communicate with BKE through USB I/F. - Monitoring for LCD open / close and tablet mode. - Switch illumination and beep sound generation which control by BKE. - OS (Windows XP Professional), system applications installed. - Stored User data (Image, Preset) - 28GB space for Image and Database - USB and LAN I/F located left side of the system. - EPT PWB mounted on this PWB. - Composition: 1 fan and Power switch. - Mainly cooling for CPM (CPU Module) and PSU block. - Composition: 4 fans - Cooling for FTX and FRX - Display image which generate on BKE. - Monitor adjustment function for brightness and contrast. - Touch panel mounted surface of LCD. - Playing doppler sound from speaker. ・Aplio / Xario common transducer connector exchanger. Nel N N T T T Nitor N N C Control C C P PaN P P H Hard H H D Disk D D D Drive D D C Commun C C ication P PorT P P FAN FAN FAN FAN R Rear R R FAN FAN FAN FAN F Front F F L Lcd L L M MoN M M P Probe P P AD ADapter AD AD PWB CPN HDD CPT FANR FANF LMN PAD A10 A62 A64 A17 A16 A32 A70 Function explanation (Other)

[Page 15] In 2D and M mode Probe Probe Probe Probe

[Page 16] In CDI mode Probe Probe Probe Probe

[Page 17] Doppler mode Probe Probe Probe Probe

[Page 18] TSB5101& TSB5101& TSB5101& TSB5101& Press [Menu] on screen > 3/3 > Press [Maintenance] Press [Menu] on screen > 3/3 > Press [Maintenance] Press [Menu] on screen > 3/3 > Press [Maintenance] 1. 1. Press [Menu] on screen > 3/3 > Press [Maintenance] 1. 1. 2. If system ask you password, please enter password then [OK]. 2. If system ask you password, please enter password then [OK]. 2. If system ask you password, please enter password then [OK]. 2. If system ask you password, please enter password then [OK]. How to access service menu

[Page 19] SERVICE TSB5101& TSB5101& Password for security Lock, Screen Lock Password for Maintenance Menu Passwords

[Page 20] C:¥: Windows OS, System software, Preset files, Log files D:¥: Images, Database E:¥: Unknown Partition of HDD

[Page 21] Common IMG 417END*A 417END*A 417END*A Appli M&R BodyMark Annotation 01～33 NoDefault 1～(QS 登録数) OB HIPAA FuncKey Workflow Measure Bodymark ImageCreator LastOne Exam System PIMS QuickSet UserDefine CustomIni IQReportYYYYMMDDttmmss Folder Folder Folder Folder ModifyMap Preset Preset Service UsImage BootImage IQReport SystemInfo Settings MediaTemp Service Temp Bin Calib UsHelp MSSQL MPlusPlatform Tpanel Appli M&R BodyMark Annotation IMG Common IMG 01～33 QuickSet SamplePattern 50x50 75x75 Exam System RX Psel Watch Diagnostics Folder Folder Folder Folder Bin BinDebug BMP CFMap CmdList DefaultIni DefaultPreset DefData PIT FpgaDLoad Maintenance Program Work US Folder structure (C:¥) C:\

[Page 22] I M R <StydyUID> Folder Folder Folder Folder HIPPA <patientUID> Database Log Studies temp Data Log Install US pims MSSQL D:\ Folder structure (D:¥)

[Page 23] Adult heart 20 user preset Carotid 12 user preset. 64 user preset could be make through all of exam type. e.g.: Abdominal 32 user preset ¥DefaultPreset ¥DefData 01 02 03 04 64 C:¥US¥Settings¥Preset¥QuickSet C:¥US¥Program Quick Save Setting = User Preset Factory setting Exam Type Abdomen Kidney Testes Thyroid GYN Breast Neo-General Neo-Hip Adult Heart Pediatric Heart Coronary Carotid PV Arterial PV Veneous Digits MSK Preset structure

[Page 24] Still : JPEG Multi frame: AVI information in each level (Patient, Study, Image level). a. On this system image files stored with following format at D:¥PIMS¥Studies. b. This structure also keep in backup data c. Each xml file describes DICOM header Image 1 (Still) Image 2 (Still) Image 1 (Still) Image 2 (Multi Frame) Study 1 Study 2 Study 3 I ├ 120081217152835000-20081217-1.ini ├ 120081217152835000-20081217-1.ini.xml ├ 120081217152835000-20081217-1.jpg ├ 120081217152835000-20081217-1.jpg.xml ├ 120081217152835000-20081217-2.ini ├ 120081217152835000-20081217-2.ini.xml ├ 120081217152835000-20081217-2.jpg └ 120081217152835000-20081217-2.jpg.xml ├ 120081215182728609-20081215-2.avi ├ 120081215182728609-20081215-2.avi.xml ├ 120081215182728609-20081215-2.ini └ 120081215182728609-20081215-2.ini.xml ├ Study.xml ├ I │ ├ 120081215182728609-20081215-1.ini │ ├ 120081215182728609-20081215-1.ini.xml │ ├ 120081215182728609-20081215-1.jpg │ └ 120081215182728609-20081215-1.jpg.xml │ └ M └ Study.xml ├ Study.xml └ ├ Patient.xml └ 220081218142436015 ├ Patient.xml │ └ 220081217152835000 ├ Patient.xml │ └─220081215182728609 ├─ 120081218142436015 │ │ │ │ ├─ 120081217152835000 │ │ │ │ │ │ │ │ │ │ │ │ │ │ └─120081215182728609 Image data structure ¥PIMS └─studies

[Page 25] *1 , system automatically select the Yes set to function which storing user preset. Quick Save Active Automatically when transducer change? User preset will be created above operation. At this time active probe information also recorded the system. Quick Save when that probe connected to the system. *Quick Save operation Select the Exam Type that you want to create user preset > Adjust image parameter (Gain, Frequency etc) > Exam > Other > Quick Save > Enter preset name > [Save] *1:If On this system has Basic operation (User preset creation)

[Page 26] preset. Default > Select Exam Type which Quick Save belonging > Exam Press Quick Save will listed > Select the Quick Save that you want to use. * At this time, if connected transducer is not matched with transducer information *Quick Save loading operation. that recorded in Quick Save. System automatically loading Quick Save (User preset) loading procedure are listed below. Basic operation (User preset loading)

[Page 27] Confirm/Start set to [Yes]. Active Automatically when transducer change? *1: System automatically select a Quick Save which connected transducer recorded with “ [New Patient] > Enter patient information > Select Exam Type > Press Basic operation (Starting study)

[Page 28] (0010,0010) Patients Name (0010,1010) Patients Age (0010,0030) Patients Birth Date (0032,4000) Study Comments (0010,0020) Patient ID (0010,0040) Patients Sex (0010,1020) Patients Weight (0010,1030) Patients Size DICOM Information (V1.20)

[Page 29] (0008,0050) Accession Number (0008,0090) Referring Physicians Name (0010,4000) Patient Comments DICOM Information (V1.20)

[Page 30] otherwise t retrieve images Backup Format Note: We have to select “ we couldn from backup medium. Selected size 6. 6. 6. 6. “ 6. 6. 6. 6. 4. 4. 4. 4. 5. 5. 5. 5. *If the system under examination, press [New Patient] and [End Exam]. then press [OK]. Backup Format 4. 4. 4. 4. 3. 3. 3. 3. *If you want select multiple image / study, press [Software Keyboard] button and press [Ctrl] or [Shift] then select image / study. 1. Restart study or system. 2. Start [Exam Review]. 3. Connect USB memory or any other backup medium. And confirm free space of backup medium. 4. Select images which you want to backup. Then confirm 5. Confirm backup destination under [Convert] button then press [Convert]. 6. Select Basic operation (Backup images) Software Keyboard

[Page 31] Still : JPEG Multi frame: AVI information in each level (Patient, Study, Image level). a. On this system image files stored with following format at D:¥PIMS¥Studies. b. This structure also keep backup data c. Each xml file describes DICOM header Image 1 (Still) Image 2 (Still) Image 1 (Still) Image 2 (Multi Frame) Study 1 Study 2 Study 3 I ├ 120081217152835000-20081217-1.ini ├ 120081217152835000-20081217-1.ini.xml ├ 120081217152835000-20081217-1.jpg ├ 120081217152835000-20081217-1.jpg.xml ├ 120081217152835000-20081217-2.ini ├ 120081217152835000-20081217-2.ini.xml ├ 120081217152835000-20081217-2.jpg └ 120081217152835000-20081217-2.jpg.xml ├ 120081215182728609-20081215-2.avi ├ 120081215182728609-20081215-2.avi.xml ├ 120081215182728609-20081215-2.ini └ 120081215182728609-20081215-2.ini.xml ├ Study.xml ├ I │ ├ 120081215182728609-20081215-1.ini │ ├ 120081215182728609-20081215-1.ini.xml │ ├ 120081215182728609-20081215-1.jpg │ └ 120081215182728609-20081215-1.jpg.xml │ └ M └ Study.xml ├ Study.xml └ ├ Patient.xml └ 220081218142436015 ├ Patient.xml │ └ 220081217152835000 ├ Patient.xml │ └─220081215182728609 ├─ 120081218142436015 │ │ │ │ ├─ 120081217152835000 │ │ │ │ │ │ │ │ │ │ │ │ │ │ └─120081215182728609 Backup data structure ¥PIMS └─studies

[Page 32] Service Note Service Note Service Note Service Note ’ Don otherwise we t retrieve images to HDD Backup Format Note: Images converted by “ couldn . If select [OK], system retrieve images from 5. 5. 5. 5. 4. 4. 4. 4. 4. 4. 4. 4. *If the system under examination, press [New Patient] and [End Exam]. 3. 3. 3. 3. shutdown the system during image retrieving backup medium. *If you want select multiple image / study, press [Software Keyboard] button and press [Ctrl] or [Shift] then select image / study. Select image or study that you want to retrieve to system. 1. Restart study or system. 2. Start [Exam Review]. 3, Connect backup medium and confirm that the medium recognized system. 4. Select [USB] tab. System will show study list that stored in backup medium. 5. Press [Load to HDD] button, system will show the caution message that describes 6. After complete retrieving images, press [HDD] and confirm images retrieving from medium. Basic operation (Restoring backup images)

[Page 33] If system show caution message as below,system using USB device. So that we should wait for a while then try again to remove operation as same manner. System still show same message, please shut down and remove USB device. 3. 3. 3. 3. button. *If the system under examination, press [New Patient] and [End Exam]. ” Eject USB device 1. Restart study or system. 2. Open [Exam Review]. 3. Press 4. Remove USB device from system. Basic operation (Removing USB device)

[Page 34] Press [New Patient] > Press [End Exam] > Press [OK] for confirmation dialog Basic operation (End examination)

[Page 35] t need any power supplying. system temporally and quick start up realizable. This function doesn Turn off the system temporally without power source. Battery providing power source to physical memory. Turn of If remove battery without no AC input under Standby, next start up will same as start up from Shutdown. System keeps standby condition approx. 24 H. If using fresh and full charged battery. If closing LCD monitor system goes to Standby. If closing LCD monitor system goes to Standby. If closing LCD monitor system goes to Standby. *: *: If closing LCD monitor system goes to Standby. *: *: Shutdown: Turn off the system. Standby: System status stored on the physical memory. Hibernation: System status stored on HDD. * In this status, press power switch again, system goes to Shutdown. - About Shutdown / Standby / Hibernation. 1. Press power switch of the system 2. System show a dialog that describes Shutdown, Standby and Hibernation. 3. Select one of the operation, Shutdown, Standby or Hibernation. Basic operation (System shutdown)

[Page 36] Battery capacity less than 5 minuets, system showing following caution dialog. If no AC input connected, system goes to shut down automatically. System running with battery: 30 min / 1 hour (STD / High capacity) Basic operation (System Running with battery)

[Page 37] Step on the pedal then adjust the height of cart. 1. Adjust the height: 2. Detach main system: Shutdown the system, then release the lock by lock lever. Operating for UZWT-640A (Pole cart)

[Page 38] -417END*A - - confirm please System behavior error, None None Caution dialog appeared System goes to shutdown Set battery pack. For that error message. Warning dialogis displayed. Battery Pack (High Capacity) cannot be calculated. Full charged (25% - 100% charged) Part charged (9% - 25% charged) Less charged (5% - 9% charged) Battery almost flat (0% - 5% charged) No battery pack Or error. The remaining charge Battery pack AC input LED: Blinking green color. Status LED: Blinking amber color. Battery LED: Blinking green color. (Standard Capacity) cannot be calculated. Full charged （50% - 100% chargede） Part charged (18% - 50% charged) Less charged (8% - 18% charged) Battery almost flat (0% - 8% charged) No battery pack Or error. The remaining charge and If system shut down caused temperature abnormality, all LEDs are blinking. Green on Battery Indicator turn Turn on Green color Turn on Amber color Blinking green color Blinkig amber color Turn off the LED LED Amber color alternately Battery status indicator

[Page 39] HDD LAN-ACT LAN-SPD DEC-5 DEC-1 DEC-2 DEC-3 DEC-4 Turn on the LED when close monitor Turn on the LED when close monitor Turn on the LED when close monitor Turn on the LED when close monitor Turn on the LED during system running Turn on the LED during system running Turn on the LED during system running Turn on the LED during system running Not to use Not to use Not to use Not to use Not to use Not to use Not to use Not to use Not to use Not to use Not to use Not to use Blinking when system access to HDD Blinking when system access to HDD Blinking when system access to HDD Blinking when system access to HDD Blinking when system detected network access Blinking when system detected network access Blinking when system detected network access Blinking when system detected network access Blinking when system detected 100 base network Blinking when system detected 100 base network Blinking when system detected 100 base network Blinking when system detected 100 base network : : : : : : : : : : : : : : : : : : : : : : : : 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 ACT: ACT: ACT: SPD: SPD: SPD: -1 - - -2 - - -3 - - -4 - - -5 - - -ACT: - - -SPD: - - DEC DEC- DEC DEC DEC DEC- DEC DEC DEC DEC- DEC DEC DEC DEC- DEC DEC DEC DEC- DEC DEC HDD HDD HDD HDD LAN LAN- LAN LAN LAN LAN- LAN LAN Status definition Remove battery System status indicator located under battery pack

[Page 40] System working with AC input System working without AC input Power Monitor Power Monitor Power Monitor . .. ..] > [Hardware Diagnostic] > enter password > touch [Exe.] for Power Monitor ..] > [Hardware Diagnostic] > enter password > touch [Exe.] for ..] > [Hardware Diagnostic] > enter password > touch [Exe.] for Diag..] > [Hardware Diagnostic] > enter password > touch [Exe.] for Diag Diag Touch [Menu] > go to 3/3 > [Maintenance] Touch [Menu] > go to 3/3 > [Maintenance] Touch [Menu] > go to 3/3 > [Maintenance] After check the status restart the system. After check the status restart the system. After check the status restart the system. After check the status restart the system. 1. 1. Touch [Menu] > go to 3/3 > [Maintenance] 1. 1. 2. [ 2. [Diag 2. [ 2. [ 3. System will show you power status including BATTERY condition 3. System will show you power status including BATTERY condition. 3. System will show you power status including BATTERY condition 3. System will show you power status including BATTERY condition Power Monitoring Function

[Page 41] System working without AC input System working with AC input Power Monitoring Function (Differences)

[Page 42] Description Current value of the battery pack Current capacity of the battery pack Full charge capacity of the battery pack The number of times the battery pack has been discharged Usage data for the battery pack Cumulative operating time in each temperature range Aging of the battery pack * Data for replacement: 65% or less Unit mAh % mAh cycle h % Parameter Current Relative State Of Charge Full Charge Capacity Discharge Cnt History Of Temp Aging battery PWB BAT Description Internal temperature of the PWS PWB Line voltage value of TX+V18V2 Line voltage value of TX+V18V1 Line voltage value of A-5.6V Line voltage value of D-5V Voltage value of the CMOS battery Rated capacity of the battery pack Current temperature of the battery pack Voltage value of the battery pack Unit deg C V V V V V mAh deg C V Parameter Temperature TX+V18V2 TX+V18V1 A-5.6V D-5V CMOS Battery Design Capacity Temperature Voltage PWB PWS BKE BAT Power Monitoring Function (Details)

[Page 43] date]. date]. date]. .] > [System Maintenance] > enter password > touch [Calibration] .] > [System Maintenance] > enter password > touch [Calibration] .] > [System Maintenance] > enter password > touch [Calibration] Config.] > [System Maintenance] > enter password > touch [Calibration] Config Config Touch [Menu] > go to 3/3 > [Maintenance] Touch [Menu] > go to 3/3 > [Maintenance] Touch [Menu] > go to 3/3 > [Maintenance] Restart the system. Restart the system. Restart the system. Restart the system. 1. 1. Touch [Menu] > go to 3/3 > [Maintenance] 1. 1. 2. [ 2. [Config 2. [ 2. [ 3. Touch the + which displayed on monitor 9 times then touch [Up 3. Touch the + which displayed on monitor 9 times then touch [Update]. 3. Touch the + which displayed on monitor 9 times then touch [Up 3. Touch the + which displayed on monitor 9 times then touch [Up Adjustment For Touch Screen

[Page 44] nagement] > System nagement] > System nagement] > System on. on. on. allation. allation. allation. ion. ion. ion. System ID can be confirm at [Maintenance] > [Conf.] > [Option Ma System ID can be confirm at [Maintenance] > [Conf.] > [Option Management] > System System ID can be confirm at [Maintenance] > [Conf.] > [Option Ma System ID can be confirm at [Maintenance] > [Conf.] > [Option Ma System ID has generated from BKE and HDD information. System ID has generated from BKE and HDD information. System ID has generated from BKE and HDD information. System ID has generated from BKE and HDD information. * : * : * : * : a. System serial number a. System serial number a. System serial number a. System serial number b. System ID b. System ID b. System ID b. System ID In this system software option must be need license cede to inst In this system software option must be need license cede to installation. In this system software option must be need license cede to inst In this system software option must be need license cede to inst License code generation routing is difference depends on the reg License code generation routing is difference depends on the region. License code generation routing is difference depends on the reg License code generation routing is difference depends on the reg Anyway we need information listed below to license code generati Anyway we need information listed below to license code generation. Anyway we need information listed below to license code generati Anyway we need information listed below to license code generati Option License

[Page 45] sword. sword. sword. displayed. displayed. displayed. displayed. . . .. Install window Install window Install window Install window ] then ] then ] then ] then Install from Code Install from Code Install from Code Install from Code Touch [Menu] > go to 3/3 > [Maintenance] Touch [Menu] > go to 3/3 > [Maintenance] Touch [Menu] > go to 3/3 > [Maintenance] 1. 1. Touch [Menu] > go to 3/3 > [Maintenance] 1. 1. 2. [Conf.] > [Option Management] > [Option Settings] > Enter pas 2. [Conf.] > [Option Management] > [Option Settings] > Enter password. 2. [Conf.] > [Option Management] > [Option Settings] > Enter pas 2. [Conf.] > [Option Management] > [Option Settings] > Enter pas 3. Press [Add 3. Press [Add 3. Press [Add 3. Press [Add 4. Select 4. Select 4. Select 4. Select Optional software Installation (Step1)

[Page 46] then press [OK]. then press [OK]. then press [OK]. then press [OK]. Installation of license(s) succeeded. Installation of license(s) succeeded. Installation of license(s) succeeded. Installation of license(s) succeeded. Enter license code Enter license code Enter license code 1. 1. Enter license code 1. 1. 2. If license is correct system automatically show License name. 2. If license is correct system automatically show License name. 2. If license is correct system automatically show License name. 2. If license is correct system automatically show License name. 3. Press [Apply] then [YES]. 3. Press [Apply] then [YES]. 3. Press [Apply] then [YES]. 3. Press [Apply] then [YES]. 4. System show a dialog 4. System show a dialog 4. System show a dialog 4. System show a dialog Optional software Installation (Step2)

[Page 47] Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes USDI-641A V2.0 and later No No Yes Yes Yes Yes Yes Yes Yes Yes USDI-640A V2.0 and later No No Yes Yes Yes Yes Yes Yes Yes Yes USDI-640A V1.2 and later System MWM SCU MPPS SCU *1: USDI-641A applicable on and later V2.0 system. Storage SCU Verification SCU Service class DICOM Setup Procedure

[Page 48] , system will set Storage/Query/Retrieve local , system will set Storage/Query/Retrieve local , system will set Storage/Query/Retrieve local , system will set Storage/Query/Retrieve local system then press [Apply]. system then press [Apply]. system then press [Apply]. Viamo system then press [Apply]. Viamo Viamo Use the same AE Title for all service Use the same AE Title for all service Use the same AE Title for all service Use the same AE Title for all service * If you check for * If you check for * If you check for * If you check for AE Title for all service. (MWM, MPPS, Print, Verification) AE Title for all service. (MWM, MPPS, Print, Verification) AE Title for all service. (MWM, MPPS, Print, Verification) AE Title for all service. (MWM, MPPS, Print, Verification) Touch [Menu] > go to 3/3 > [Maintenance] Touch [Menu] > go to 3/3 > [Maintenance] Touch [Menu] > go to 3/3 > [Maintenance] 1. 1. Touch [Menu] > go to 3/3 > [Maintenance] 1. 1. 2. [Conf.] > [Local Node Setting] > enter password. 2. [Conf.] > [Local Node Setting] > enter password. 2. [Conf.] > [Local Node Setting] > enter password. 2. [Conf.] > [Local Node Setting] > enter password. 3. Please enter AE titles for 3. Please enter AE titles for Viamo 3. Please enter AE titles for 3. Please enter AE titles for DICOM Setup Procedure (Local AE Title)

[Page 49] Step 1) windows displayed. windows displayed. windows displayed. windows displayed. Add Edit DICOM Nodes Add Edit DICOM Nodes Add Edit DICOM Nodes Add Edit DICOM Nodes Go to [Remote Node Setting]. Go to [Remote Node Setting]. Go to [Remote Node Setting]. 1. 1. Go to [Remote Node Setting]. 1. 1. 2. Press [Add] then 2. Press [Add] then 2. Press [Add] then 2. Press [Add] then

[Page 50] Step 2) window displayed. window displayed. window displayed. window displayed. windows displayed. windows displayed. windows displayed. windows displayed. window. window. window. window. Host Add / DEL Host Add / DEL Host Add / DEL Host Add / DEL Advanced TCP Address Advanced TCP Address Advanced TCP Address Advanced TCP Address Host Add / DEL Host Add / DEL Host Add / DEL Host Add / DEL “ “ Press [Host Add/DEL] then Press [Host Add/DEL] then Press [Host Add/DEL] then 1. 1. Press [Host Add/DEL] then 1. 1. 2. Press [Add] then 2. Press [Add] then 2. Press [Add] then 2. Press [Add] then 3. Enter remote node Host name and IP address then press [OK]. 3. Enter remote node Host name and IP address then press [OK]. 3. Enter remote node Host name and IP address then press [OK]. 3. Enter remote node Host name and IP address then press [OK]. 4. Press [Close] for 4. Press [Close] for 4. Press [Close] for 4. Press [Close] for

[Page 51] s port number. s port number. s port number. s port number. Step 3) System confirm that DICOM connection with Verification service class. System confirm that network connection with PING System will show you association result which you selected service class. le or host name. le or host name. le or host name. [Test]: [DICOM Echo]: [Ping]: system. system. system. t need same value as AE title or Host name. t need same value as AE title or Host name. t need same value as AE title or Host name. t need same value as AE title or Host name. ’ Xario system. Xario Xario / Xario / / Aplio / Aplio Aplio in in Aplio in in . This value doesn . This value doesn . This value doesn . This value doesn Logical name Logical name Logical name Logical name ” “ 0A on V2.0 system, we cannot use MWM and MPPS. 0 0 s AE Title for AE Title, select the Host Name and enter server s AE Title for AE Title, select the Host Name and enter server s AE Title for AE Title, select the Host Name and enter server s AE Title for AE Title, select the Host Name and enter server Mnemonic Name Mnemonic Name Mnemonic Name Mnemonic Name “ *1, *2 This value will be shown in server list instead of actual AE title or host name. This value will be shown in server list instead of actual AE tit This value will be shown in server list instead of actual AE tit This setting same idea as This setting same idea as This setting same idea as This setting same idea as 3. * *This value will be shown in server list instead of actual AE tit * * If the system use USDI-640 3. *2: V2.0 with USDI-641A Enter Enter Enter *1: V1.20 system only support Storage and Verification service class. *2: On and later V2.0 with USDI-641A, we can use Storage, MWM and MPPS. 1. 2. 1. 1. Enter 1. 1. 2. Enter server 2. Enter server 2. Enter server 2. Enter server 3. Select the service which the server supported service class. 3. Select the service which the server supported service class. 3. Select the service which the server supported service class. 3. Select the service which the server supported service class. 4. Press [Apply] then save the setting to the system then [OK]. 4. Press [Apply] then save the setting to the system then [OK]. 4. Press [Apply] then save the setting to the system then [OK]. 4. Press [Apply] then save the setting to the system then [OK].

[Page 52] Setup for Storage service Setup for Storage service Setup for Storage service Setup for Storage service

[Page 53] setting displayed. setting displayed. setting displayed. Here you can change detail setting for DICOM image transmitting format. Detail) Press [Details] then a dialog shown press [ OK]. Storage details setting displayed. Press [Details] then a dialog shown press [ OK]. Storage details Press [Details] then a dialog shown press [ OK]. Storage details 1. 1. Press [Details] then a dialog shown press [ OK]. Storage details 1. 1. DICOM Setup Procedure (Storage

[Page 54] Transfer Mode Batch : All acquired data are transferred after the examination from Patient list. In Progress: Image data is transferred in real time each time an image is acquired. End Exam: All acquired data are transferred after the examination automatically. Used to specify the timing of data transmission to the PACS when Remote Node is selected. Server to which DICOM images are transferred. If a server is selected here, DICOM images are automatically transferred to the server when Still Store or Clip Store is performed. Used to transmit automatically all DICOM Queue that have not yet been transmitted. These DICOM Queue are automatically transferred to the server when the system is started up, returns from standby mode and/or is connected through LAN access. (V2.0 and later DICOM Storage DICOM Storage DICOM Storage DICOM Storage Transfer Mode Server1 Auto Sync End examination. (New patient > press [End exam]) End examination. (New patient > press [End exam]) End examination. (New patient > press [End exam]) 1. 1. End examination. (New patient > press [End exam]) 1. 1. 2. Press [Exam Review] > 2. Press [Exam Review] > 2. Press [Exam Review] > 2. Press [Exam Review] > 3. Select 3. Select 3. Select 3. Select

[Page 55] mage mage mage nd exam. nd exam. nd exam. V1.20. V1.20. V1.20. Viamo V1.20. Viamo Viamo Sending image by manually from exam review after E Sending image by manually from exam review after End exam. Sending image by manually from exam review after E Sending image by manually from exam review after E (V1.20 Transfer Mode: Network connection is available） DICOM Storage DICOM Storage DICOM Storage DICOM Storage Batch: Batch: Batch: Batch: in progress: System automatically send images when user stored i in progress: System automatically send images when user stored image in progress: System automatically send images when user stored i in progress: System automatically send images when user stored i End examination. (New patient > press [End exam]) End examination. (New patient > press [End exam]) End examination. (New patient > press [End exam]) In case network connection available. In case network connection available. In case network connection available. In case network connection available. There is no mobile mode in There is no mobile mode in Viamo There is no mobile mode in There is no mobile mode in 1. 1. End examination. (New patient > press [End exam]) 1. 1. 2. Press [Exam Review] > 2. Press [Exam Review] > 2. Press [Exam Review] > 2. Press [Exam Review] > 3. Select 3. Select 3. Select 3. Select Behavior of this setting. Behavior of this setting. Behavior of this setting. Behavior of this setting.

[Page 56] V1.20. V1.20. V1.20. Viamo V1.20. Viamo Viamo Failed status recorded on Job status. Failed status recorded on Job status. Failed status recorded on Job status. Failed status recorded on Job status. (V1.20 Transfer Mode: Network connection is not available） * These job still arrive in job status even after Standby. * These job still arrive in job status even after Standby. * These job still arrive in job status even after Standby. * These job still arrive in job status even after Standby. DICOM Storage DICOM Storage DICOM Storage DICOM Storage Batch: Batch: Batch: Batch: in progress: Failed status recorded on Job status. in progress: Failed status recorded on Job status. in progress: Failed status recorded on Job status. in progress: Failed status recorded on Job status. End examination. (New patient > press [End exam]) End examination. (New patient > press [End exam]) End examination. (New patient > press [End exam]) In case network connection is NOT available. In case network connection is NOT available. In case network connection is NOT available. In case network connection is NOT available. There is no mobile mode in There is no mobile mode in Viamo There is no mobile mode in There is no mobile mode in 1. 1. End examination. (New patient > press [End exam]) 1. 1. 2. Press [Exam Review] > 2. Press [Exam Review] > 2. Press [Exam Review] > 2. Press [Exam Review] > 3. Select 3. Select 3. Select 3. Select Behavior of this setting. Behavior of this setting. Behavior of this setting. Behavior of this setting.

[Page 57] Setup for MWM service Setup for MWM service Setup for MWM service Setup for MWM service

[Page 58] to use it setting displayed. setting displayed. setting displayed. Set as Default Check the as the default server. . Detail) Press [Details] then a dialog shown press [ OK]. Storage details setting displayed. Press [Details] then a dialog shown press [ OK]. Storage details Press [Details] then a dialog shown press [ OK]. Storage details 1. 1. Press [Details] then a dialog shown press [ OK]. Storage details 1. 1. DICOM Setup Procedure (MWM

[Page 59] Setup for MPPS service Setup for MPPS service Setup for MPPS service Setup for MPPS service

[Page 60] to use it setting displayed. setting displayed. setting displayed. Set as Default Check the as the default server. . Detail) Press [Details] then a dialog shown press [ OK]. Storage details setting displayed. Press [Details] then a dialog shown press [ OK]. Storage details Press [Details] then a dialog shown press [ OK]. Storage details 1. 1. Press [Details] then a dialog shown press [ OK]. Storage details 1. 1. DICOM Setup Procedure (MPPS

[Page 61] 417END*A 417END*A 417END*A ○ ○ ○ － ○ － ○ ○ － ○ － － － － － － － ○ － -417END*A - - Restore SD730 SD730- SD730 SD730 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Backup Item All data Service information Site information System information Hardware information Software information Peripheral device information Composition information Information on self-diagnosis results for service engineers Information on the history of performed services Information on the history of pressed keys Error occurrence information System cumulative operating time information Transducer cumulative operation time information Self-diagnosis result information for user System maintenance result information IQ Report data Conf./DICOM Management Conf./Option Management HIPAA related log Data Site Description Service Settings HW/SW Information-Hardware HW/SW Information-Software HW/SW Information-Peripheral Configuration Hardware Diagnostics Service Event Log Key History Log Error Log System Use Time Transducer Use Time System Test Result System Maintenance Result IQ Report Service Network HIPAA All Packages ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Restore ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Backup information information Item information information Registration information All data Preset information System Configuration Special Configuration Needle Adaptor information Key Custom information Application Preset Each Application Preset Quick Save Patient OB Preset User-specified Body Mark information PIMS settings information Image information Received PIT information Preset Abdomen1 Penile Data System Configuration Key Custom Application Quick Save Measure Registration OB Preset Body mark Custom PIMS PIT Preset data Image Creator Preset Backup / Restore function All Packages

[Page 62] 8. 8. 8. 8. press [OK]. 7. 7. 7. 7. Write Completed 6. 6. 6. 6. 5. 5. 5. 5. *In this time we can select items. > 3/3 > [Maintenance] * If you set a media which required format, in this time please select [OK]. 3. 3. 3. 3. 4. 4. 4. 4. 5. 5. 5. 5. 1. [Menu] 2. [Utilis] > [Backup Restore Tool] then enter password > [OK] 3. Connect backup media such as USB memory and select appropriate media in list of “Media”. 4. Confirm that the [Backup] for “Command” setting 5. Check for [All Packages] then [Go]. 6. System ask formatting the media, usually [Cancel] it. 7. Enter backup folder then select [OK]. 8. System starting backup. If you have a dialog which shown Preset and Log data backup

[Page 63] 6. 6. 6. 6. 5. 5. 5. 5. > 3/3 > [Maintenance] 3. 3. 3. 3. 4. 4. 4. 4. 5. 5. 5. 5. Shutdown the system and restart the system. 1. [Menu] 2. [Utilis] > [Backup Restore Tool], enter password > [OK] 3. Connect backup media. Select the media from list of “Media”. 4. Select [Restore] for “Command” setting and select a folder which created in backup. 5. Select items which you want to restore then press [Go]. 6. When completed restoring, system shown a dialog which requested shutdown. Preset data restore

[Page 64] t charge. recognize the battery. Power Monitor. recognize another Viamo Battery couldn Battery problem. Replace Battery.(UEBP-640A) 1. Check battery condition with 2. As a result system not 3. Also the battery is not Problem: Result: Action: If you order the battery pack with claim handler, you should attached Power monitor result. Please read more detail in Power Monitor section in service note. Remarks: Failure example

[Page 65] PROBE connector. connect procedure to user. (BSM31-9611) Probe not recognized. Missing echo. Replace PROBE CNN 1. Confirm PIN bending on 2. Explain probe remove and Problem: Result: Action: When connecting probe to system, user put a probe slightly tiled to probe connector but locked it. Remarks: Failure example

[Page 66] Disassemble (Overview)

[Page 67] 1. Remove AC adaptor, cables form system. 2. Close LCD monitor. 3. Release the battery latch and slide the battery pack. Disassemble (Remove battery)

[Page 68] These screws fixed CPU module mounted on BKE. These screws fixed hinge of the LCD monitor. 1. Remove battery pack 2. Turn over the system. 3. Remove screws which indicate in above figure. 4. Turn over the system again. Disassemble (Remove Main panel, LCD monitor, PWB)

[Page 69] 1. Open LCD monitor vertically. 2. Hold operation panel and raise it then put it down right side above picture accordingly. 3. Remove cables which connected to LCD monitor and main panel. Disassemble (Remove Main panel, LCD monitor, PWB)

[Page 70] BKE and MDP. Disassemble (Remove PWB) 1. Remove USB and DVI-I connector unit 2. Remove screws which marked with screw mark on

[Page 71] The yellow cable which connected to FTX must be wiring like above. (Must be put on FTX.) Otherwise it may caused noise problem. Notification when assembling system

[Page 72] Six M2.5 × 5 screws Push to open them. Provide clearance between the right and left covers. 1. Remove control pane and LCD monitor from main unit and remove cables. 2. Rotate LCD monitor 90 degrees. 3. Remove hinge cover then we can fined screws. 4. Remove screws then lift up LCD monitor at this time care for cables which connected to LCD monitor. Disassemble (Remove LCD monitor)

[Page 73] 1） 裏返していた、本体を元に戻す Please care for direction of magnet which located on top of the LCD. It indicate that monitor open / close status. Disassemble (Disassemble LCD monitor)

[Page 74] 1） 裏返していた、本体を元に戻す Magnetic sensor It detect monitor open / close status. Disassemble (Disassemble Main Panel)

[Page 75] SD730 SD730- SD730 SD730 2J708-848EN 2J708-845EN 2J708-846EN 2J708-847EN J/E J/E J/E J/E Installation & Check Sheet Installation & Check Sheet Installation & Check Sheet Installation & Check Sheet UISD-64 0A, 6 41A UISD-64 0A, 6 41A UISD-64 0A, 6 41A UISD-64 0A, 6 41A UIPS-640A UIPS-640A UIPS-640A UIPS-640A UJUR-64 0A UJUR-64 0A UJUR-64 0A UJUR-64 0A UIB U- 641A UIB U- 641A UIB U- 641A UIB U- 641A Service Parts No 2B730-964JA*E YJM55700B-6 2B730-964EN*E YEM55700B-6 2B730-966JA*D YJM55700C-4 2B730-966EN*D YEM55700C-4 2B730-968JA*B YJM55700D-2 2B730-968EN*B YEM55700D-2 2B730-970JA*A YJM55700Q-2 2B730-970EN*A YEM55700Q-2 2C730-532JA*D YJM55700E-5 2C730-532EN*D YEM55700E-5 2J730-515JA*A YJM55700F-1 2J730-515EN*A YEM55700F-1 2D730-528JA*D YJM55700G-4 2D730-528EN*D YEM55700G-4 2F730-510EN*D YEM55700J-4 2K730-117EN*B YEM55700K-2 2Y730-508JA*D YJM55700L-4 2Y730-508EN*D YEM55700L-4 2D730-530JA*C YJM55700P-3 2D730-530EN*C YEM55700P-3 2B730-972JA*D YJM55700N-4 ENG (USA) 2B730-969EN*A YAM55700D-1 (V2.1）

[Page 76] SD730 SD730- SD730 SD730 2J708-841EN 2J708-768EN 2J708-842EN J/E J/E J/E Installation & Check Sheet Installation & Check Sheet Installation & Check Sheet USDI-64 1A USDI-64 1A USDI-64 1A USDI-64 1A UZWT-6 41A UZWT-6 41A UZWT-6 41A UZWT-6 41A UIB U- 640A UIB U- 640A UIB U- 640A UIB U- 640A Service Parts No YJM55700Q-1 YEM55700Q-1 2B730-964JA*D YJM55700B-5 2B730-964EN*D YEM55700B-5 2B730-966JA*C YJM55700C-3 2B730-966EN*C YEM55700C-3 2B730-968JA*B YJM55700D-2 2B730-968EN*B YEM55700D-2 2B730-970JA 2B730-970EN 2C730-532JA*C YJM55700E-4 2C730-532EN*C YEM55700E-4 2J730-515JA*A YJM55700F-1 2J730-515EN*A YEM55700F-1 2D730-528JA*C YJM55700G-3 2D730-528EN*C YEM55700G-3 2F730-510EN*C YEM55700J-3 2K730-117EN*A YEM55700K-1 2Y730-508JA*C YJM55700L-3 2Y730-508EN*C YEM55700L-3 2D730-530JA*B YJM55700P-2 2D730-530EN*B YEM55700P-2 2B730-972JA*C YJM55700N-3 ENG (USA) 2B730-969EN*A YAM55700D-1 (V2.0）

[Page 77] SD730 SD730- SD730 SD730 2C708-898EN 2J708-767EN 2C708-900EN 2J708-769EN 2C708-901EN 2J708-770EN 2B708-520JA 2B708-520EN 2C708-902EN 2J708-771EN 2C708-903EN 2J708-772EN 2C708-913EN 2J708-778EN J/E J/E J/E J/E J/E J/E JPN ENG J/E J/E J/E J/E J/E J/E Sheet Installation Installation Installation Operation Installation Installation Installation Installation Check Sheet Installation Check Sheet Installation Check Sheet Installation Check Sheet Installation Check Installation Check Sheet UZWT-6 40A POLE CART UZWT-6 40A POLE CART UZWT-6 40A POLE CART UZWT-6 40A POLE CART UITC-64 0A Transducer Adaptor UITC-64 0A Transducer Adaptor UITC-64 0A Transducer Adaptor UITC-64 0A Transducer Adaptor UEB P-64 0A, UEB P-641 A B attery Pack UEB P-64 0A, UEB P-641 A B attery Pack UEB P-64 0A, UEB P-641 A B attery Pack UEB P-64 0A, UEB P-641 A B attery Pack UEB C-6 40A Quick B atte ry Charger UEB C-6 40A Quick B atte ry Charger UEB C-6 40A Quick B atte ry Charger UEB C-6 40A Quick B atte ry Charger UEAA-640A AC Adaptor UEAA-640A AC Adaptor UEAA-640A AC Adaptor UEAA-640A AC Adaptor UEPS-640A, -64 1A, - 642A Prin ter Support Kit UEPS-640A, -64 1A, - 642A Prin ter Support Kit UEPS-640A, -64 1A, - 642A Prin ter Support Kit UEPS-640A, -64 1A, - 642A Prin ter Support Kit Service Parts No YAM55700D-0 YJM55700Q-0 YEM55700Q-0 YJM55700F-0 YEM55700F-0 YJM55700N-2 2B730-964JA*B YJM55700B-3 2B730-964EN*B YEM55700B-3 2B730-966JA*B YJM55700C-2 2B730-966EN*B YEM55700C-2 2B730-968JA*A YJM55700D-1 2B730-968EN*A YEM55700D-1 2B730-970JA 2B730-970EN 2C730-532JA*B YJM55700E-3 2C730-532EN*B YEM55700E-3 2J730-515JA 2J730-515EN 2D730-528JA*B YJM55700G-2 2D730-528EN*B YEM55700G-2 2F730-510EN*B YEM55700J-2 2K730-117EN*A YEM55700K-1 2Y730-508JA*B YJM55700L-2 2Y730-508EN*B YEM55700L-2 2D730-530JA*A YJM55700P-1 2D730-530EN*A YEM55700P-1 2B730-972JA ENG (USA) 2B730-969EN (V1.2）

[Page 78] Perform periodic maintenance of the system. Turn OFF the power of the system. Connect the AC adaptor to the system. Connect the AC adaptor and turn ON the power of the system. Reinstall the system program. Replace BKE and confirm that no error occurs. Replace the fan and confirm that no error occurs. Turn OFF the power of the system to allow the CPU and BKE to cool. If the error occurs even after the CPU and BKE have cooled, replace BKE. Shut down the system to allow the system to cool. If the error occurs even after the system has cooled, replace BKE. Replace the CMOS battery and confirm that no error occurs. Periodic maintenance message Message indicating that a memory leak has occurred. Message indicating that the charge remaining in the battery is below the warning level. Message indicating that the charge remaining in the battery is below the danger level. Message indicating that the software version is incompatible. Message indicating an RACS monitoring abnormality. Message indicating a fan monitoring abnormality. Message indicating that CPU or BKE temperature is abnormal. Message indicating that the system temperature is abnormal. Message indicating that there is an abnormality in the CMOS battery. Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Caution Caution Caution Caution Caution Caution Caution Caution Caution Message The operating time of this system has reached inspection date. Please contact your service representative for a preventive maintenance. (NAME OF SERVICE REPRESENTATIVE) (TEL NUMBER) [CW001] The system is unstable. Please shutdown the system. [CW002] Please connect the AC adapter, Otherwise the system will be shutdown within 2 minutes. [CW003] Please check the installed software version. The system will become unstable. [CW005] RACS Error!! Please contact your service representative for a corrective maintenance. [CW006] Fan Error!! Please contact your service representative for a corrective maintenance. [CW007] System temperature Error!! Please contact your service representative for a corrective maintenance. [CW008] System Temperature Error!! Shutting down the system. [CW009] CMOS Battery Error!! Please contact your service representative for a corrective maintenance. [CW010] ID Service Error CW001 CW002 CW003 CW004 Low battery. Shutting down. [CW004] CW005 CW006 CW007 CW008 CW009 CW010 ERROR MESSAGES 1 2 3 4 5 6 7 8 9 No. 10 6. 6.1

[Page 79] Replace the AC adapter and confirm that no error occurs. Turn OFF the power of the system. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Message indicating that the temperature of the AC adapter is abnormal. Message indicating an abnormality in the power supply. (Common message for all types of power supply abnormality) Message indicating a battery abnormality (recovery impossible). (Message for all types of battery charge abnormalities) Message indicating a battery abnormality (recovery impossible). (Message for all types of battery discharge abnormalities) Message indicating a battery abnormality (recovery impossible). (Message for all types of battery temperature abnormalities) Message indicating a battery abnormality (recovery impossible). (Message for all types of battery size abnormalities) Message indicating performance deterioration abnormality after years of service. Message indicating that the temperature of the battery is abnormal. Message indicating that the temperature of the battery is abnormal. Message indicating that the battery is not charged fully. Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Construction/ periodic monitoring Caution Caution Caution Caution Caution Caution Caution Caution Caution Caution AC Adapter Error!! Please contact your service representative for a corrective maintenance. [CW011] Power supply Error!! Please contact your service representative for a corrective maintenance. [CW012] Battery Error!! Please contact your service representative for a corrective maintenance. [CW013] Battery Error!! Please contact your service representative for a corrective maintenance. [CW014] Battery Error!! Please contact your service representative for a corrective maintenance. [CW015] Battery Error!! Please contact your service representative for a corrective maintenance. [CW016] Running time of the battery pack became long. Please exchange with a new pack. [CW017] Battery Temperature Error!! Please contact your service representative for a corrective maintenance. [CW018] Battery Temperature Error!! Please contact your service representative for a corrective maintenance. [CW019] Please charge the battery fully. Capacity left is not clear. [CW020] ID CW011 CW012 CW013 CW014 CW015 CW016 CW017 CW018 CW019 CW020 No. 11 12 13 14 15 16 17 18 19 20

[Page 80] Replace PWS and confirm that no error occurs. Replace PWS and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace the battery and confirm that no error occurs. Replace FTX and confirm that no error occurs. Replace FTX and confirm that no error occurs. Replace FTX and confirm that no error occurs. Error indicating a voltage abnormality in the PWS. Error indicating that the PWS temperature exceeds the specified value. Error indicating that the battery pack temperature exceeds the specified value. Error indicating that the battery pack voltage exceeds the specified value. Error indicating that the battery pack current exceeds the specified value. Error indicating that the remaining charge in the battery pack does not satisfy the specified value. Error indicating that the full charge capacity of the battery pack does not satisfy the specified value. Error indicating that the rated capacity of the battery pack does not satisfy the specified value. Error indicating a battery pack abnormality. (End of the battery pack's lifetime or detection of abnormality in the battery pack) FTX CPLD register read/write error FTX TXPG register/memory read/write error An error is detected in the CI Bus check for FTX. Function Service Service Service Service Service Service Service Service Service Service Service Service Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function ID SD001 PWS: Voltage Error!! [SD001] SD002 PWS: Temperature Error!! [SD002] SD003 BAT: Temperature Error!! [SD003] SD004 BAT: Voltage Error!! [SD004] SD005 BAT: Electrical Current Error!! [SD005] SD006 BAT: Relative State Of Charge Error!! [SD006] SD007 BAT: Full Charge Capacity Error!! [SD007] SD008 BAT: Design Capacity Error!! [SD008] SD009 BAT: Battery Status Error!! [SD009] SD010 FTX: CPLD Register Error!! [SD010] SD011 FTX: TXPG Register/Memory Error!! [SD011] SD012 FTX: CI Bus Error!! [SD012] No. 21 22 23 24 25 26 27 28 29 30 31 32

[Page 81] Replace FTX and confirm that no error occurs. Replace FTX and confirm that no error occurs. Replace FRX and confirm that no error occurs. Replace FRX and confirm that no error occurs. Replace FRX and confirm that no error occurs. Replace FRX and confirm that no error occurs. Replace FRX and confirm that no error occurs. Replace FRX and confirm that no error occurs. Replace FRX and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. An error is detected in the TXFD Bus line check for FTX. Error indicating abnormality of electric power supplied to FTX CPLD. FRX CPLD register read/write error FRX RXBF register read/write error FRX RXBF memory read/write error An error is detected in the CI Bus check for FRX RXBF. An error is detected in the BC Bus line check for FRX RXBF. Connection test error with AD-RXBF Echo, RXBF-BWPR2 Echo, or FERX LVDS Sync. An error is detected in the analog line check for FRX. Error indicating that the temperature sensor has detected an abnormality in FRX. BKE BWPR2 register read/write error BKE BWPR2 memory read/write error Connection test error with BWPR2- DOPDET Echo of BKE BWPR2 BKE CFDET register/memory read/write error Function Service Service Service Service Service Service Service Service Service Service Service Service Service Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function ID SD013 FTX: TXFD Bus Error!! [SD013] SD014 FTX: CPLD Watch Power [SD014] SD015 FRX: CPLD Register Error!! [SD015] SD016 FRX: RXBF Register Error!! [SD016] SD017 FRX: RXBF Memory Error!! [SD017] SD018 FRX: RXBF CI Bus Error!! [SD018] SD019 FRX: RXBF BC Bus Error!! [SD019] SD020 FRX: Sence Gain Error!! [SD020] SD021 FRX: Inside Temperature Error!! [SD021] SD022 BKE (1): BWPR2 Register Error!! [SD022] SD023 BKE (1): BWPR2 Memory Error!! [SD023] SD024 BKE (1): BWPR2 Test Pattern Error!! [SD024] SD025 BKE (1): CFDET Register/Memory Error!! [SD025] No. 33 34 35 36 37 38 39 40 41 42 43 44 45

[Page 82] Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. BKE BCRAM memory error Error indicating that BKE RACS does not operate. BKE CFP3 register/memory read/write error BKE DOP·CFNC·CFLUT register/memory read/write error An error is detected in the UP Bus check for MDP. BKE MDPD UP Bus register read/write error An error is detected in the X Bus I/F check for BKE MDPD. An error is detected in BWPR PLL/clock control port or BKE PWB HW monitor port. Error indicating a power abnormality in the FPGA core power operation (PWRGDL). Error indicating that BKE DSP does not operate. An error is detected in the SH-3 check for BKE. Error indicating that there is abnormality in the 40 MHz clock input status (CK40L) of MDPD_CPLD. Function Service Service Service Service Service Service Service Service Service Service Service Service Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function BKE (1): CFNCDOP Register/Memory Error!! [SD029] ID No. 46 SD026 BKE (1): BCRAM Memory Error!! [SD026] 47 SD027 BKE (1): RACS Execution Error!! [SD027] 48 SD028 BKE (1): CFP3 Register/Memory Error!! [SD028] 49 SD029 50 SD030 BKE (1): UP Bus Error!! [SD030] 51 SD031 BKE (1): MDPD1 Register Error!! [SD031] 52 SD032 BKE (1): MDPD2 X Bus Error!! [SD032] 53 SD033 BKE (1): MDPD3 Clock Enable Error!! [SD033] 54 SD034 BKE (1): FPGA Core Power Error!! [SD034] 55 SD035 BKE (1): Doppler DSP Error!! [SD035] 56 SD036 BKE (1): SH-3 Error!! [SD036] 57 SD037 BKE (1): System Clock Error!!

[Page 83] Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Wait until the message indicating that updating is complete is displayed. BKE PCIF SRAM read/write error Error indicating abnormality in the UP fan. Error indicating an abnormality in the CMOS battery voltage on BKE. Error indicating that the system temperature sensor and FAN control temperature sensor detect temperature abnormality. Error indicating that there is a voltage abnormality in the BKE. JTAG error Error indicating that the CPU temperature exceeds the specified temperature. Error indicating an abnormality in the hard disk. Error indicating that serial number cannot be written to EEPROM. Error indicating that the serial number information work file cannot be loaded correctly. Error indicating that the serial number information work file cannot be opened. Message indicating that program files are being written to the flash memory as a result of the detection of the updated programs for the RBF devices. tion FPGA Function Service Service Service Service Service Service Service Service Service Service Service configura- Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Test Pro function Message ID No. 58 SD038 BKE (2): SRAM Access Error!! [SD038] 59 SD039 BKE (2): UP Cooling Fan Error!! [SD039] 60 SD040 BKE (2): CMOS Battery Voltage Error!! [SD040] 61 SD041 BKE (2): Internal Temperature Error!! [SD041] 62 SD042 BKE (2): Volt Retister Error!! [SD042] 63 SD043 BKE (2): PCIF/CPM GPIO JTAG Error!! [SD043] 64 SD044 BKE (3): CPU Temperature Error!! [SD044] 65 SD045 HDD: HDD Information Error!! [SD045] 66 SD046 Set Serial Number: EEPROM Wirte Error. [SD046] 67 SD047 Set Serial Number: File Read Error. [SD047] 68 SD048 Set Serial Number: File Open Error. [SD048] 69 CC001 Updating device programs. Please wait. [CC001]

[Page 84] Wait until the message indicating that updating is complete is displayed. Wait until the message indicating that updating is complete is displayed. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Message indicating that the programs for JTAG devices are being configured. Message indicating that FPGA configuration programs have been successfully updated. Message indicating that the FPGA configuration status file has not been created. Message indicating that the FPGA revision catalog file has not been loaded. Message indicating that the program revision catalog file has not been acquired from H/W. Message indicating that software revision mismatches have been detected at three consecutive system startups. RBF device program file open error FPGA file load error FPGA FPGA FPGA FPGA FPGA FPGA FPGA FPGA configuration configuration configuration configuration configuration configuration configuration configuration Caution Caution Caution Caution Caution Caution Message Message Device programs have been updated. Select [OK] to restart the system. [CC003] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC004] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC005] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC006] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC007] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC008] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC009] ID No. 70 CC002 Updating device programs. Please wait. [CC002] 71 CC003 72 CC004 73 CC005 74 CC006 75 CC007 76 CC008 77 CC009

[Page 85] Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. Replace BKE and confirm that no error occurs. FPGA file size acquisition error FLASH ROM load error FLASH ROM write error Verify error JTAG program file OPEN or size acquisition error JTAG configuration error Message indicating that a timeout error occurred while H/W FPGA was being configured. FPGA FPGA FPGA FPGA FPGA FPGA FPGA configuration configuration configuration configuration configuration configuration configuration Caution Caution Caution Caution Caution Caution Caution An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC010] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC011] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC012] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC013] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC014] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC015] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC016] ID No. 78 CC010 79 CC011 80 CC012 81 CC013 82 CC014 83 CC015 84 CC016

[Page 86] Replace BKE and confirm that no error occurs. Replace any one of FTX or BKE and confirm that no error occurs. Reboot the system and confirm that no error occurs. If the error still occurs, identify the malfunctioning PWB from the error log, replace this PWB, and confirm that no error occurs. Reinstall the system program. Reinstall the system program. Terminate all activated functions and reinstall the system program. Terminate all activated functions and reinstall the system program. Replace either the HDD or installer and perform installation again. Replace the HDD and perform installation again. Replace either the HDD or installer and perform installation again. Message indicating that an error has been recorded in the system upgrade result logs. Incompatibility between PCB Name and H/W program Message indicating that the PWB recognition error has occurred at startup of the system. Message indicating that the system upgrade has failed. Message prompting reattempt of system upgrade. Message indicating that a specific process shutdown timeout error has occurred. Message indicating that a specific process shutdown timeout error has occurred. Message indicating that an installation startup error has occurred. Message indicating that an installation timeout error has occurred. Error message indicating that previously used installer files have not been deleted. Ctrl Ctrl Ctrl Ctrl Ctrl Ctrl Ctrl FPGA FPGA Function EEPROM configuration configuration SysUpgrade SysUpgrade SysUpgrade SysUpgrade SysUpgrade SysUpgrade SysUpgrade Caution Caution Caution Caution Caution Caution Caution Caution Caution Caution An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. Shutdown: Restart the system. Ignore: The system may not work normally. [CC017] An error has occurred in updating device programs. Please contact your service representative for a corrective maintenance. ShutDown: Restart the system. Ignore: The system may not work normally. [CC018] EEPROM Access Error (EEPROM: PWB name) Please contact your service representative for a corrective maintenance. [CE001] System upgrade failed. Upgrade is executed again. Cancel: The movement of the system cannot be secured. [SI001] System upgrade failed. System does not work normally. [SI002] Timeout Error !! Because a system is working, it cannot carry out installation. [SI003] Busy Error !! Because a system is working, it cannot carry out installation. [SI004] Install Error !! Hard disk or System Disk may be broken. Please change it. [SI005] Install Timeout Error !! Hard disk may be broken. Please change it. [SI006] File Delete Error !! Hard disk or System Disk may be broken. Please change it. [SI007] ID SI001 SI002 SI003 SI004 SI005 SI006 SI007 No. 85 CC017 86 CC018 87 CE001 88 89 90 91 92 93 94

[Page 87] Replace either the HDD or installer and perform installation again. Error message indicating that an installation copy error has occurred. Ctrl SysUpgrade Caution File Copy Error !! Hard disk or System Disk may be broken. Please change it. [SI008] ID SI008 No. 95

[Page 88] diagnostic ultrasound system Systems Data No. MSDUS0037EA V1.1 g ENE r A l TM Viamo shares its core imaging engine with Toshiba's pre - TM mium ultrasound platform Aplio XG to provide an unprec - edented level of imaging performance. It employs XBT transducers and supports Pulse Subtraction THI, providing image quality comparable to that of premium-class sys - tems. TM It is also possible to use Aplio/Xario -series transducers. Viamo starts up within 15 seconds after the power is turned ON. The slim pole-cart allows the system to be easily moved anywhere in the medical facility to perform high-quality examinations. The main unit, which can be detached from the cart by one-touch operation, is pow - SSA-640A ered by an internal battery. It is also possible to store images on hard disk or external media such as a USB flash drive. Viamo's elegant design minimizes the number of switches on the operating panel. In addition, the large 15-inch LCD observation monitor also functions as a touchscreen. The buttons displayed on the screen can be touched with a fin - gertip, ensuring intuitive operation. SSA-640A+UZWT-640A

[Page 89] S y S t EM MA trix of SSA-640A u nit m odel name r emarks TM Main unit SSA-640A Laptop style ultrasound system including 15-inch LCD, Color Doppler, Pulse Subtraction THI, PWD, standard battery, AC power adaptor <Option> Pole-cart UZWT-640A Pole-type cart on which the main unit and a printer can be mounted AC adaptor UEAA-640A AC power adaptor (100-120 V, 220-240 V) for the main unit. An AC adaptor is supplied with the main unit as standard. Battery pack UEBP-640A Standard-capacity battery pack. The system can be operated continuously for approximately 30 minutes using this battery. A battery pack is supplied with the main unit as standard. UEBP-641A Large-capacity battery pack. The system can be operated continuously for approximately 1 hour using this battery. Double-speed UEBC-640A External quick charger for the battery pack. This charger can charge one or two spare battery charger batteries at one time. Transducer adaptor UITC-640A Connector conversion adaptor for connecting Aplio/Xario-compatible transducers to Viamo Printer support kit UEPS-641A Power unit and signal cable (for 220-240 V) for connecting a B/W printer to Viamo UEPS-642A Power unit and signal cable (for 110-120 V) for connecting a B/W printer to Viamo t r ANSDU c E r o ptio NS m lti-Freq. t H i m odel Freq. Pulse Pulse s can type B-mode t H i Q s P B-P s P t rapezoid r emarks name ( m Hz) s ubtraction s ubtraction ( m Hz) ( m Hz) on o FF PVT-375ST Convex 70° 3.5 6.0 4.0 1.9 5.0 4.0 – –    PLT-704ST Linear 38 mm 7.5 11.0 8.6 6.2 8.4 6.2 – –    UITC-640A is PLT-805AT Linear 58 mm 8.0 12.0 10.0 6.2 9.0 6.6 – –    required UITC-640A is PVT-382BT Convex 80° 3.5 5.5 3.7 1.8 5.0 3.8 – –    required PST-25ST Sector 90° 2.5 4.2 3.0 1.8 2.0 3.0 4.0 4.4    

[Page 90] block ch A rt S y S t EMS S p E cific A tio NS System Viamo • Scan methods: Linear scan (including oblique and trapezoid) Main unit SSA-640A Sector scan Convex scan Battery pack Battery pack* • Monitor: 15-inch LCD monitor UEBP-640A UEBP-640A – XGA (1024 × 768) UEBP-641A – Monitor tilt range: 0° to 180° – Monitor rotation: Right 180° maximum AC adaptor Left 90° maximum UEAA-640A – Tablet mode: Available Double-speed B-mode battery charger • Viewing depth UEBC-640A The viewing depth differs depending on the transducer used. Transducer adaptor Minimum depth: 2 cm UITC-640A Maximum depth: 28 cm • Line density Transducer L, H (can be preset) PLT-805AT • Scan angle and scan width PVT-382BT – Adjustment of scan angle (scan width) is possible. – Adjustment of scan steering (scanning position) is pos - Printer support kit sible. UEPS-641A – Adjustment of linear scan steering is possible. UEPS-642A • PAN/EXPAND B/W printer Real-time PAN/EXPAND UP-D897SYN, P95D – Scale can be enlarged or reduced by the encoder. – The panning position can be arbitrarily selected using the trackball. Pole-cart • Focus UZWT-640A Transmission: Maximum 8 steps Reception: Continuous Auto-focusing: Available • Transmission frequency Multi-frequency: Maximum 7 types * Only a single battery can be installed at one time. (including THI) • B-mode image quality adjustment – Dynamic range – Edge enhancement – Time-smoothing (persistence) – Auto gain control – Postprocessing • Gain: Display brightness for B-mode display can be changed. • STC: 8-step slide controls (common to B and M modes) • Acoustic output adjustment: Adjustable up to 100% (19 steps) • Color Palette: 5 types • THI (Tissue Harmonic Imaging) – Pulse Subtraction THI: Available

[Page 91] • Display orientation: Rotation is possible. Color Doppler Left/right reversal is possible. • Color Doppler mode • Quick Scan: Quick Scan enables automatic – CDI mode gain and STC control for · Flow velocity B-mode. · Flow velocity/variance • Parallel processing: OFF/PSP · Power • Color Doppler velocity M-mode range selection • M-mode sweep speed: 4 steps (C Scale): Up to 33 types • M-mode gain: Display brightness for M-mode • Color Doppler time display can be changed. smoothing • M-mode image quality adjustment (C Time-Smoothing): 3 types – M-mode dynamic range • Color Doppler frame interpolation (C Frame Interpolation) – M-mode edge enhancement Automatically set according to the transducer information – M-mode postprocessing and selected exam conditions. • Color Palette: 5 types • Color Doppler baseline (C Baseline): ±8 steps Spectrum Doppler • Color reversal: Available • Doppler mode: PWD (Pulsed-Wave Doppler) • Balance between • Doppler pulse repetition B/W and color display: 13 types frequency (PRF) • Parallel color Doppler PWD: 1.3 kHz to 15.2 kHz processing: OFF/PSP/QSP • Doppler scan: B/D simultaneous scan • Color gain: 61 steps D-only scan • Color Doppler • Doppler sampling multi-frequency: 2 types volume: 13 types • Color Doppler line • Sample shift: 0-24 cm density: 3 types • Doppler filter: 7 steps • Color ROI (Region of Interest) • Doppler gain: 41 steps Adjustment of color ROI position, size, and angle is possible. • Indication of Doppler spectrum direction: Display of the forward and back - ward velocity spectrum can be reversed. • Doppler baseline shift (zero-shift): 9 types (±4 types) • Doppler audio: Stereo output (forward flow and backward flow) • Color Palette: 5 types • Display of Doppler scale: 2 types (velocity and Doppler shift frequency) • Doppler focus: Automatically follows the sample position. • Doppler angle mark display: Available • Oblique Doppler scan: Oblique scan is possible with some linear transducers. 2D 10° (1 step) CDI 30° (3 steps) PW 30° (3 steps) • Doppler multi-frequency: 2 types • Doppler sweep speed: 4 steps

[Page 92] Measurement functions Signal I/O • 2D-mode measurements • Transducer connectors – Distance: 8 CH – Transducer – Angle: 8 CH connectors: 1 – A rea and circumference • External video output signal (tracing, cross, ellipse, – DVI-I: 1 spline): 8 CH • USB: 2 channels – Volume (ellipse): 8 CH • Ethernet – Cross: 8 CH – 100 BT: 1 channel – Parallel: 8 CH – Joint: 8 CH Requirements for use – Mean IMT: 8 CH • Main unit – Trace length: 8 CH – Line voltage: 24 VDC – Thickness: 8 CH – Power capacity: 5.63 A – Circle: 8 CH • AC adaptor • M-mode measurements – Line voltage: 100 VAC to 120 VAC, – Distance: 8 CH 220 VAC to 240 VAC – Time: 8 CH – Line frequency: 50 Hz/60 Hz – Slope: 8 CH – Power capacity: 1.8 A to 1.4 A, – Heart rate (The mean 0.9 A to 0.8 A of 1 to 8 heart rates • Printer support kit (UEPS-641A) can be selected.): 8 CH – Line voltage: 220 V-240 V • PW Doppler measurements – Line frequency: 50 Hz/60 Hz – Velocity: 8 CH – Power capacity: 1.98 A-1.81 A – Acceleration: 8 CH • Printer support kit (UEPS-642A) – Time: 8 CH – Line voltage: 110 V-120 V – Heart rate (The mean – Line frequency: 50 Hz/60 Hz of 1 to 8 heart rates – Power capacity: 3.95 A-3.63 A can be selected.): 8 CH • Environmental requirements for use – Velocity trace: 8 CH – Temperature: 10°C to 35°C – Relative humidity: 35% to 85% (no condensation) Cine memory (mass-storage image memory) – Atmospheric pressure: 700 hPa to 1060 hPa • 2D: Maximum 511 frames • M-mode: 15/30/60/120 s Peripheral devices • CDI: Maximum 511 frames • B/W digital printer: Sony UP-D897SYN • M-CDI/PWD: 15/30/60/120 s Mitsubishi P95D Recording functions Others • Printer (option) • Supported languages: English (UK), German, French, Black and white printer: Digital IF English (US), Italian, Spanish, • Storage & Archiving Portuguese, Norwegian, Finnish, Hard disk drive Swedish, Russian Memory: Device via USB port • Online help/manuals: Supported

[Page 93] Safety classification Compliance • According to the type of protection against electric shock: • General CLASS I EQUIPMENT IEC60601-1 (1988), Amd. 1 (1991), Amd. 2 (1995) • According to the degree of protection against electric shock: • Particular EQUIPMENT WITH TYPE-BF APPLIED PARTS IEC60601-2-37 Ed1.1 (2004), Amd. 2 (2005) (Transducer) • Acoustic Power • According to the degree of protection against harmful Information for Manufacturers Seeking Marketing ingress of water: Clearance of Diagnostic Ultrasound Systems and Ordinary EQUIPMENT (enclosed EQUIPMENT without Transducers (2008) (FDA guidance) protection against ingress of water) • Electromagnetic Compatibility (EMC) • According to the degree of safety of application in the IEC60601-1-2 (2001), Amd. 1 (2004) presence of a FLAMMABLE ANESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE: EQUIPMENT not suitable for use in the presence of a FLAMMABLE ANESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE • According to the mode of operation: CONTINUOUS OPERATION D i MENS io NS , MASS , AND pow E r co NSUM ptio N e xternal dimensions m ass Power consumption u nit m odel name mm (in) kg (lb) (V a ) (approx.) Width Height d epth (approx.) Main unit SSA-640A 350 99 398 8.2 0.2 kVA (13.8) (3.9) (15.7) (18.1) Main unit + Pole-cart SSA-640A + UZWT-640A 550 750 550 26 0.2 kVA (21.7) (29.5) (21.7) (57.3)

[Page 94] MASS m odel name n ame of component m ass [kg] (lb) m odel name n ame of component m ass [kg] (lb) System main unit Transducers SSA-640A Viamo 8.2 (18.1) PLT-704ST Linear transducer 0.6 (1.3) Options/Accessories for main unit PLT-805AT Linear transducer 0.85 (1.9) P95D B/W printer 2.6 (5.7) PST-25ST Sector transducer 0.5 (1.1) UEAA-640A AC adaptor 1.2 (3.2) PVT-375ST Convex transducer 0.6 (1.3) Double-speed PVT-382BT Convex transducer 0.8 (1.8) UEBC-640A 1.7 (3.7) battery charger UEBP-640A Battery pack 1 (2.2) UEBP-641A Battery pack 1.85 (4.1) UEPS-641A Printer support kit 4.5 (9.9) UEPS-642A Printer support kit 4.5 (9.9) UITC-640A Transducer adaptor 0.9 (2.0) UP-D897SYN B/W printer 2.6 (5.7) UZWT-640A Pole-cart 17 (37.5)

[Page 95] Toshiba Medical Systems Corporation meets internationally recognized standards for Quality Management System ISO 9001, ISO 13485. Toshiba Medical Systems Corporation Nasu Operations meets the ©Toshiba Medical Systems Corporation 2009 all rights reserved. Environmental Management System standard, ISO 14001. Design and specifications subject to change without notice. Made for Life, Viamo, Aplio, Xario, and Pulse Subtraction are 2009-4 TME/KI trademarks of Toshiba Medical Systems Corporation. 93 Printed in Japan

[Page 96] diagnostic ultrasound system Systems Data No. MSDUS0037EAA V1.2 g ENE r A l TM Viamo shares its core imaging engine with Toshiba's pre - TM mium ultrasound platform Aplio XG to provide an unprec - edented level of imaging performance. It employs XBT transducers and supports Pulse Subtraction THI, providing image quality comparable to that of premium-class sys - tems. TM It is also possible to use Aplio/Xario -series transducers. Viamo starts up within 15 seconds after the power is turned ON. The slim pole-cart allows the system to be easily moved anywhere in the medical facility to perform high-quality examinations. The main unit, which can be detached from the cart by one-touch operation, is pow - SSA-640A ered by an internal battery. It is also possible to store images on hard disk or external media such as a USB flash drive. Viamo's elegant design minimizes the number of switches on the operating panel. In addition, the large 15-inch LCD observation monitor also functions as a touchscreen. The buttons displayed on the screen can be touched with a fin - gertip, ensuring intuitive operation. SSA-640A+UZWT-640A

[Page 97] S y S t EM MA trix of SSA-640A u nit m odel name r emarks TM Main unit SSA-640A Laptop style ultrasound system including 15-inch LCD, Color Doppler, Pulse Subtraction THI, PWD, standard battery, AC power adaptor <Option> Pole-cart UZWT-640A Pole-type cart on which the main unit and a printer can be mounted AC adaptor UEAA-640A AC power adaptor (100-120 V, 220-240 V) for the main unit. An AC adaptor is supplied with the main unit as standard. Battery pack UEBP-640A Standard-capacity battery pack. The system can be operated continuously for approximately 30 minutes using this battery. A battery pack is supplied with the main unit as standard. UEBP-641A Large-capacity battery pack. The system can be operated continuously for approximately 1 hour using this battery. Double-speed UEBC-640A External quick charger for the battery pack. This charger can charge one or two spare battery charger batteries at one time. Transducer adaptor UITC-640A Connector conversion adaptor for connecting Aplio/Xario-compatible transducers to Viamo Printer support kit UEPS-641A Power unit and signal cable (for 220-240 V) for connecting a B/W printer to Viamo UEPS-642A Power unit and signal cable (for 110-120 V) for connecting a B/W printer to Viamo DICOM USDI-640A Kit for adding "Storage to server". This kit can be enabled using an electronic license. t r ANSDU c E r o ptio NS m lti-Freq. t H i m odel Freq. Pulse Pulse s can type B-mode t H i Q s P B-P s P t rapezoid r emarks name ( m Hz) s ubtraction s ubtraction ( m Hz) ( m Hz) on o FF PVT-375ST Convex 70° 3.5 6.0 4.0 1.9 5.0 4.0 – –    PLT-704ST Linear 38 mm 7.5 11.0 8.6 6.2 8.4 6.2 – –    UITC-640A is PLT-805AT Linear 58 mm 8.0 12.0 10.0 6.2 9.0 6.6 – –    required UITC-640A is PVT-382BT Convex 80° 3.5 5.5 3.7 1.8 5.0 3.8 – –    required PST-25ST Sector 90° 2.5 4.2 3.0 1.8 4.4 4.0 3.0 2.0    

[Page 98] block ch A rt S y S t EMS S p E cific A tio NS System Viamo • Scan methods: Linear scan (including oblique and trapezoid) Main unit SSA-640A Sector scan Convex scan Battery pack Battery pack* • Monitor: 15-inch LCD monitor UEBP-640A UEBP-640A – XGA (1024 × 768) UEBP-641A – Monitor tilt range: 0° to 180° – Monitor rotation: Right 180° maximum AC adaptor Left 90° maximum UEAA-640A – Tablet mode: Available Double-speed B-mode battery charger • Viewing depth UEBC-640A The viewing depth differs depending on the transducer used. Transducer adaptor Minimum depth: 2 cm UITC-640A Maximum depth: 28 cm • Line density Transducer L, H (can be preset) PLT-805AT • Scan angle and scan width PVT-382BT – Adjustment of scan angle (scan width) is possible. – Adjustment of scan steering (scanning position) is pos - Printer support kit sible. UEPS-641A – Adjustment of linear scan steering is possible. UEPS-642A • PAN/EXPAND B/W printer Real-time PAN/EXPAND UP-D897SYN, P95D – Scale can be enlarged or reduced by the encoder. – The panning position can be arbitrarily selected using the trackball. Pole-cart • Focus UZWT-640A Transmission: Maximum 8 steps Reception: Continuous Auto-focusing: Available • Transmission frequency Multi-frequency: Maximum 7 types * Only a single battery can be installed at one time. (including THI) • B-mode image quality adjustment – Dynamic range – Edge enhancement – Time-smoothing (persistence) – Auto gain control – Postprocessing • Gain: Display brightness for B-mode display can be changed. • STC: 8-step slide controls (common to B and M modes) • Acoustic output adjustment: Adjustable up to 100% (19 steps) • Color Palette: 5 types • THI (Tissue Harmonic Imaging) – Pulse Subtraction THI: Available

[Page 99] • Display orientation: Rotation is possible. Color Doppler Left/right reversal is possible. • Color Doppler mode • Quick Scan: Quick Scan enables automatic – CDI mode gain and STC control for · Flow velocity B-mode. · Flow velocity/variance • Parallel processing: OFF/PSP · Power • Color Doppler velocity M-mode range selection • M-mode sweep speed: 4 steps (C Scale): Up to 33 types • M-mode gain: Display brightness for M-mode • Color Doppler time display can be changed. smoothing • M-mode image quality adjustment (C Time-Smoothing): 3 types – M-mode dynamic range • Color Doppler frame interpolation (C Frame Interpolation) – M-mode edge enhancement Automatically set according to the transducer information – M-mode postprocessing and selected exam conditions. • Color Palette: 5 types • Color Doppler baseline (C Baseline): ±8 steps Spectrum Doppler • Color reversal: Available • Doppler mode: PWD (Pulsed-Wave Doppler) • Balance between • Doppler pulse repetition B/W and color display: 13 types frequency (PRF) • Parallel color Doppler PWD: 1.3 kHz to 15.2 kHz processing: OFF/PSP/QSP • Doppler scan: B/D simultaneous scan • Color gain: 61 steps D-only scan • Color Doppler • Doppler sampling multi-frequency: 2 types volume: 13 types • Color Doppler line • Sample shift: 0-24 cm density: 3 types • Doppler filter: 7 steps • Color ROI (Region of Interest) • Doppler gain: 41 steps Adjustment of color ROI position, size, and angle is possible. • Indication of Doppler spectrum direction: Display of the forward and back - ward velocity spectrum can be reversed. • Doppler baseline shift (zero-shift): 9 types (±4 types) • Doppler audio: Stereo output (forward flow and backward flow) • Color Palette: 5 types • Display of Doppler scale: 2 types (velocity and Doppler shift frequency) • Doppler focus: Automatically follows the sample position. • Doppler angle mark display: Available • Oblique Doppler scan: Oblique scan is possible with some linear transducers. 2D 10° (1 step) CDI 30° (3 steps) PW 30° (3 steps) • Doppler multi-frequency: 2 types • Doppler sweep speed: 4 steps

[Page 100] Measurement functions Signal I/O • 2D-mode measurements • Transducer connectors – Distance: 8 CH – Transducer – Angle: 8 CH connectors: 1 – A rea and circumference • External video output signal (tracing, cross, ellipse, – DVI-I: 1 spline): 8 CH • USB: 2 channels – Volume (ellipse): 8 CH • Ethernet – Cross: 8 CH – 100 BT: 1 channel – Parallel: 8 CH – Joint: 8 CH Requirements for use – Mean IMT: 8 CH • Main unit – Trace length: 8 CH – Line voltage: 24 VDC – Thickness: 8 CH – Power capacity: 5.63 A – Circle: 8 CH • AC adaptor • M-mode measurements – Line voltage: 100 VAC to 120 VAC, – Distance: 8 CH 220 VAC to 240 VAC – Time: 8 CH – Line frequency: 50 Hz/60 Hz – Slope: 8 CH – Power capacity: 1.8 A to 1.4 A, – Heart rate (The mean 0.9 A to 0.8 A of 1 to 8 heart rates • Printer support kit (UEPS-641A) can be selected.): 8 CH – Line voltage: 220 V to 240 V • PW Doppler measurements – Line frequency: 50 Hz/60 Hz – Velocity: 8 CH – Power capacity: 1.98 A to 1.81 A – Acceleration: 8 CH • Printer support kit (UEPS-642A) – Time: 8 CH – Line voltage: 110 V to 120 V – Heart rate (The mean – Line frequency: 50 Hz/60 Hz of 1 to 8 heart rates – Power capacity: 3.95 A to 3.63 A can be selected.): 8 CH • Environmental requirements for use – Velocity trace: 8 CH – Temperature: 10°C to 35°C – Relative humidity: 35% to 85% (no condensation) Cine memory (mass-storage image memory) – Atmospheric pressure: 700 hPa to 1060 hPa • 2D: Maximum 511 frames • M-mode: 15/30/60/120 s Peripheral devices • CDI: Maximum 511 frames • B/W digital printer: Sony UP-D897SYN • M-CDI/PWD: 15/30/60/120 s Mitsubishi P95D Recording functions Others • Printer (option) • Supported languages: English (UK), German, French, Black and white printer: Digital IF English (US), Italian, Spanish, • Storage & Archiving Portuguese, Norwegian, Finnish, Hard disk drive Swedish, Russian Memory: Device via USB port • Online help/manuals: Supported DICOM (USDI-640A is required) • Storage to server

[Page 101] Safety classification Compliance • According to the type of protection against electric shock: • General CLASS I EQUIPMENT IEC60601-1 (1988), Amd. 1 (1991), Amd. 2 (1995) • According to the degree of protection against electric shock: • Particular EQUIPMENT WITH TYPE-BF APPLIED PARTS IEC60601-2-37 Ed1.1 (2004), Amd. 2 (2005) (Transducer) • Acoustic Power • According to the degree of protection against harmful Information for Manufacturers Seeking Marketing ingress of water: Clearance of Diagnostic Ultrasound Systems and Ordinary EQUIPMENT (enclosed EQUIPMENT without Transducers (2008) (FDA guidance) protection against ingress of water) • Electromagnetic Compatibility (EMC) • According to the degree of safety of application in the IEC60601-1-2 (2001), Amd. 1 (2004) presence of a FLAMMABLE ANESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE: EQUIPMENT not suitable for use in the presence of a FLAMMABLE ANESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE • According to the mode of operation: CONTINUOUS OPERATION D i MENS io NS , MASS , AND pow E r co NSUM ptio N e xternal dimensions m ass Power consumption u nit m odel name mm (in) kg (lb) (V a ) (approx.) Width Height d epth (approx.) Main unit SSA-640A 350 99 398 8.2 0.2 kVA (13.8) (3.9) (15.7) (18.1) Main unit + Pole-cart SSA-640A + UZWT-640A 550 750 550 26 0.2 kVA (21.7) (29.5) (21.7) (57.3)

[Page 102] MASS m odel name n ame of component m ass [kg] (lb) m odel name n ame of component m ass [kg] (lb) System main unit Transducers SSA-640A Viamo 8.2 (18.1) PLT-704ST Linear transducer 0.6 (1.3) Options/Accessories for main unit PLT-805AT Linear transducer 0.85 (1.9) P95D B/W printer 2.6 (5.7) PST-25ST Sector transducer 0.5 (1.1) UEAA-640A AC adaptor 1.2 (3.2) PVT-375ST Convex transducer 0.6 (1.3) Double-speed PVT-382BT Convex transducer 0.8 (1.8) UEBC-640A 1.7 (3.7) battery charger UEBP-640A Battery pack 1 (2.2) UEBP-641A Battery pack 1.85 (4.1) UEPS-641A Printer support kit 4.5 (9.9) UEPS-642A Printer support kit 4.5 (9.9) UITC-640A Transducer adaptor 0.9 (2.0) UP-D897SYN B/W printer 2.6 (5.7) UZWT-640A Pole-cart 17 (37.5)

[Page 103] Toshiba Medical Systems Corporation meets internationally recognized standards for Quality Management System ISO 9001, ISO 13485. Toshiba Medical Systems Corporation Nasu Operations meets the ©Toshiba Medical Systems Corporation 2009 all rights reserved. Environmental Management System standard, ISO 14001. Design and specifications subject to change without notice. Made for Life, Viamo, Aplio, Xario, and Pulse Subtraction are 2009-6 TME/KI trademarks of Toshiba Medical Systems Corporation. 101 Printed in Japan

[Page 104] diagnostic ultrasound system Systems Data No. MSDUS0037EAB V2.0 g ENE r A l TM Viamo shares its core imaging engine with Toshiba's pre- TM mium ultrasound platform Aplio XG to provide an unprec- edented level of imaging performance. It employs XBT TM transducers and supports Pulse Subtraction THI, provid- ing image quality comparable to that of premium-class systems. TM It is also possible to use Aplio/Xario -series transducers. Viamo starts up within 15 seconds after the power is turned ON. The slim pole-cart allows the system to be easily moved anywhere in the medical facility to perform high-quality examinations. The main unit, which can be detached from the cart by one-touch operation, is pow- SSA-640A ered by an internal battery. It is also possible to store images on hard disk or external media such as a USB flash drive. Viamo's elegant design minimizes the number of switches on the operating panel. In addition, the large 15-inch LCD observation monitor also functions as a touchscreen. The buttons displayed on the screen can be touched with a fin- gertip, ensuring intuitive operation. SSA-640A+UZWT-640A SSA-640A+UZWT-640A+UZWT-641A

[Page 105] S y S t EM MA trix of SSA-640A u nit m odel name r emarks Main unit SSA-640A Laptop style ultrasound system including 15-inch LCD, Color Doppler, Pulse Subtraction THI, TM PWD, ADF, ApliPure , Quick Scan, Twin View, standard battery, AC power adaptor <Option> Pole-cart UZWT-640A Pole-type cart on which the main unit and a printer can be mounted Tablet kit UZWT-641A Kit for mounting the system main unit on the UZWT-640A in tablet mode AC adaptor UEAA-640A AC power adaptor (100-120 V, 220-240 V) for the main unit. An AC adaptor is supplied with the main unit as standard. Battery pack UEBP-640A Standard-capacity battery pack. The system can be operated continuously for approximately 30 minutes using this battery. A battery pack is supplied with the main unit as standard. UEBP-641A Large-capacity battery pack. The system can be operated continuously for approximately 1 hour using this battery. Double-speed UEBC-640A External quick charger for the battery pack. This charger can charge one or two spare battery charger batteries at one time. Transducer adaptor UITC-640A Connector conversion adaptor for connecting Aplio/Xario-compatible transducers to Viamo Printer support kit UEPS-641A Power unit and signal cable (for 220-240 V) for connecting a B/W printer to Viamo UEPS-642A Power unit and signal cable (for 110-120 V) for connecting a B/W printer to Viamo DICOM USDI-641A Kit for adding "Storage to server, MWM, MPPS". This kit can be enabled using an electronic license. t r ANSDU c E r o ptio NS m lti-Freq. t H i Freq. Pulse Pulse t rape- m odel name s can type B-mode t H i Q s P B-P s P ad F a pliPure r emarks ( m Hz) s ubtraction s ubtraction zoid ( m Hz) ( m Hz) on o FF PVT-375ST Convex 70° 3.5 6.0 4.0 1.9 6.0 5.0 4.0 –      UITC-640A PVT-674BT Convex 65° 6.0 9.2 6.0 3.6 8.0 7.0 6.0 –     is required PLT-704ST Linear 38 mm 7.5 11.0 8.6 6.2 8.4 7.6 6.2 –      UITC-640A PLT-704AT Linear 38 mm 7.5 11.0 8.6 6.2 8.4 7.6 6.6 –      is required UITC-640A PLT-805AT Linear 58 mm 8.0 12.0 10.0 6.2 9.0 8.4 6.6 –      is required UITC-640A PLT-1204BT Linear 38 mm 12.0 14.0 12.0 8.0 – – – –     is required UITC-640A PLT-705BTH Linear 46 mm 7.0 11.0 8.0 6.0 8.4 6.6 5.0 –      is required UITC-640A PVT-745BTV Convex 40° 7.0 11.0 8.0 6.0 9.0 7.6 5.8 –     is required UITC-640A PVT-350BTP Convex 70° 3.5 6.0 4.0 1.9 6.0 5.0 3.0 –      is required UITC-640A PVT-661VT Convex 160° 6.0 8.8 5.8 3.6 8.0 7.2 5.6 –     is required UITC-640A PVT-382BT Convex 80° 3.5 5.5 3.7 1.8 5.0 3.8 2.8 –      is required PST-25ST Sector 90° 2.5 4.2 3.0 1.8 4.4 4.0 3.0 2.0      

[Page 106] B lock ch A rt S y S t EMS S p E cific A tio NS System Viamo • Scan methods: Linear scan (including oblique and trapezoid) Main unit SSA-640A Sector scan Convex scan Battery pack Battery pack* • Monitor: 15-inch LCD monitor UEBP-640A UEBP-640A – XGA (1024 × 768) UEBP-641A – Monitor tilt range: 0° to 180° – Monitor rotation: Right 180° maximum AC adaptor Left 90° maximum UEAA-640A – Tablet mode: Available Double-speed B-mode battery charger • Viewing depth UEBC-640A The viewing depth differs depending on the transducer used. Transducer adaptor Minimum depth: 2 cm UITC-640A Maximum depth: 28 cm • Line density Transducer L, H (can be preset) PLT-805AT • Scan angle and scan width PVT-382BT etc. – Adjustment of scan angle (scan width) is possible. – Adjustment of scan steering (scanning position) is pos- Printer support kit sible. UEPS-641A – Adjustment of linear scan steering is possible. UEPS-642A • PAN/EXPAND B/W printer Real-time PAN/EXPAND UP-D897, P95D – Scale can be enlarged or reduced by the encoder. – The panning position can be arbitrarily selected using the trackball. Pole-cart • Focus UZWT-640A Transmission: Maximum 8 steps Tablet kit Reception: Continuous UZWT-641A Auto-focusing: Available • Transmission frequency Multi-frequency: Maximum 7 types DICOM (including THI) USDI-641A • B-mode image quality adjustment – Dynamic range – Edge enhancement – Time-smoothing (persistence) – Auto gain control * Only a single battery can be installed at – Postprocessing one time. • Gain: Display brightness for B-mode display can be changed. • STC: 8-step slide controls (common to B and M modes) • Acoustic output adjustment: Adjustable up to 100% (19 steps) • Color Palette: 5 types • THI (Tissue Harmonic Imaging) – Pulse Subtraction THI: Available

[Page 107] • Display orientation: Rotation is possible. Color Doppler Left/right reversal is possible. • Color Doppler mode • Quick Scan: Quick Scan enables automatic – CDI mode gain and STC control for · Flow velocity B-mode. · Flow velocity/variance • Parallel processing: OFF/PSP · Power TM • Compound Imaging: Compound Imaging in real time – Advanced Dy NAMIC F LOW is available (ApliPure). · Directional can be displayed • Color Doppler velocity M-mode range selection • M-mode sweep speed: 4 steps (C Scale): Up to 33 types • M-mode gain: Display brightness for M-mode • Color Doppler time display can be changed. smoothing • M-mode image quality adjustment (C Time-Smoothing): 3 types – M-mode dynamic range • Color Doppler frame interpolation (C Frame Interpolation) – M-mode edge enhancement Automatically set according to the transducer information – M-mode postprocessing and selected exam conditions. • Color Palette: 5 types • Color Doppler baseline (C Baseline): ±8 steps Spectrum Doppler • Color reversal: Available • Doppler mode: PWD (Pulsed-Wave Doppler) • Balance between • Doppler pulse repetition B/W and color display: 13 types frequency (PRF) • Parallel color Doppler PWD: 1.3 kHz to 15.2 kHz processing: OFF/PSP/QSP • Doppler scan: B/D simultaneous scan • Color gain: 61 steps D-only scan • Color Doppler • Doppler sampling multi-frequency: 2 types volume: 13 types • Color Doppler line • Sample shift: 0-24 cm density: 3 types • Doppler filter: 7 steps • Color ROI (Region of Interest) • Doppler gain: 41 steps Adjustment of color ROI position, size, and angle is possible. • Indication of Doppler spectrum direction: Display of the forward and back- ward velocity spectrum can be reversed. • Doppler baseline shift (zero-shift): 9 types (±4 types) • Doppler audio: Stereo output (forward flow and backward flow) • Color Palette: 5 types • Display of Doppler scale: 2 types (velocity and Doppler shift frequency) • Doppler focus: Automatically follows the sample position. • Doppler angle mark display: Available • Oblique Doppler scan: Oblique scan is possible with some linear transducers. 2D 10° (1 step) CDI 30° (3 steps) PW 30° (3 steps) • Doppler multi-frequency: 2 types • Doppler sweep speed: 4 steps • Quick Scan: Quick Scan enables automatic adjustmant of Doppler wareform.

[Page 108] Measurement functions Signal I/O • 2D-mode measurements • Transducer connectors – Distance: 8 CH – Transducer – Angle: 8 CH connectors: 1 – Area and circumference • External video output signal (tracing, cross, ellipse, – DVI-I: 1 spline): 8 CH • USB: 2 channels – Volume (ellipse): 8 CH • Ethernet – Cross: 8 CH – 100 BT: 1 channel – Parallel: 8 CH – Joint: 8 CH Requirements for use – Mean IMT: 8 CH • Main unit – Trace length: 8 CH – Line voltage: 24 VDC – Thickness: 8 CH – Power capacity: 5.63 A – Circle: 8 CH • AC adaptor • M-mode measurements – Line voltage: 100 VAC to 120 VAC, – Distance: 8 CH 220 VAC to 240 VAC – Time: 8 CH – Line frequency: 50 Hz/60 Hz – Slope: 8 CH – Power capacity: 1.8 A to 1.4 A, – Heart rate (The mean 0.9 A to 0.8 A of 1 to 8 heart rates • Printer support kit (UEPS-641A) can be selected.): 8 CH – Line voltage: 220 V to 240 V • PW Doppler measurements – Line frequency: 50 Hz/60 Hz – Velocity: 8 CH – Power capacity: 1.98 A to 1.81 A – Acceleration: 8 CH • Printer support kit (UEPS-642A) – Time: 8 CH – Line voltage: 110 V to 120 V – Heart rate (The mean – Line frequency: 50 Hz/60 Hz of 1 to 8 heart rates – Power capacity: 3.95 A to 3.63 A can be selected.): 8 CH • Environmental requirements for use – Velocity trace: 8 CH – Temperature: 10°C to 35°C – Relative humidity: 35% to 85% (no condensation) Cine memory (mass-storage image memory) – Atmospheric pressure: 700 hPa to 1060 hPa • 2D: Maximum 511 frames • M-mode: 15/30/60/120 s Peripheral devices • CDI: Maximum 511 frames • B/W digital printer: Sony UP-D897 • M-CDI/PWD: 15/30/60/120 s Mitsubishi P95D Recording functions Others • Printer (option) • Supported languages: English (UK), German, French, Black and white printer: Digital IF English (US), Italian, Spanish, • Storage & Archiving Portuguese, Norwegian, Finnish, Hard disk drive Swedish, Russian Memory: Device via USB port • Online help/manuals: Supported DICOM (USDI-641A is required) • Storage to server • MWM • MPPS

[Page 109] Safety classification Compliance • According to the type of protection against electric shock: • General CLASS I EQUIPMENT IEC60601-1 (1988), Amd. 1 (1991), Amd. 2 (1995) • According to the degree of protection against electric shock: • Particular EQUIPMENT WITH TYPE-BF APPLIED PARTS IEC60601-2-37 Ed1.1 (2004), Amd. 2 (2005) (Transducer) • Acoustic Power • According to the degree of protection against harmful Information for Manufacturers Seeking Marketing ingress of water: Clearance of Diagnostic Ultrasound Systems and Ordinary EQUIPMENT (enclosed EQUIPMENT without Transducers (2008) (FDA guidance) protection against ingress of water) • Electromagnetic Compatibility (EMC) • According to the degree of safety of application in the IEC60601-1-2 (2001), Amd. 1 (2004) presence of a FLAMMABLE ANESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE: EQUIPMENT not suitable for use in the presence of a FLAMMABLE ANESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE • According to the mode of operation: CONTINUOUS OPERATION D i MENS io NS , MASS , AND pow E r co NSUM ptio N e xternal dimensions m ass Power consumption u nit m odel name mm (in) kg (lb) (V a ) (approx.) Width Height d epth (approx.) Main unit SSA-640A 350 99 398 8.2 0.2 kVA (13.8) (3.9) (15.7) (18.1) Main unit + Pole-cart SSA-640A + UZWT-640A 550 750 550 26 0.2 kVA (21.7) (29.5) (21.7) (57.3)

[Page 110] MASS m odel name n ame of component m ass [kg] (lb) m odel name n ame of component m ass [kg] (lb) System main unit Transducers SSA-640A Viamo 8.2 (18.1) PLT-704AT Linear transducer 0.85 (1.9) Options/Accessories for main unit PLT-704ST Linear transducer 0.6 (1.3) P95D B/W printer 2.6 (5.7) PLT-705BTH Linear transducer 0.85 (1.7) UEAA-640A AC adaptor 1.2 (3.2) PLT-805AT Linear transducer 0.85 (1.9) Double-speed PLT-1204BT Linear transducer 0.85 (1.9) UEBC-640A 1.7 (3.7) battery charger PST-25ST Sector transducer 0.5 (1.1) UEBP-640A Battery pack 1 (2.2) PVT-350BTP Convex transducer 0.95 (2.1) UEBP-641A Battery pack 1.85 (4.1) PVT-375ST Convex transducer 0.6 (1.3) UEPS-641A Printer support kit 4.5 (9.9) PVT-382BT Convex transducer 0.8 (1.8) UEPS-642A Printer support kit 4.5 (9.9) PVT-661VT Convex transducer 1 (2.2) UITC-640A Transducer adaptor 0.9 (2.0) PVT-674BT Convex transducer 0.9 (2.0) UP-D897 B/W printer 2.6 (5.7) PVT-745BTV Convex transducer 0.78 (1.7) USDI-641A DICOM - UZWT-640A Pole-cart 17 (37.5) UZWT-641A Tablet kit 12 (26.5)

[Page 111] Toshiba Medical Systems Corporation meets internationally recognized standards for Quality Management System ISO 9001, ISO 13485. Toshiba Medical Systems Corporation Nasu Operations meets the ©Toshiba Medical Systems Corporation 2009 all rights reserved. Environmental Management System standard, ISO 14001. Design and specifications subject to change without notice. Made for Life, Viamo, Aplio, Xario, Pulse Subtraction, DYNAMIC FLOW, 2009-11 TME/KI and ApliPure are trademarks of Toshiba Medical Systems Corporation. 109 Printed in Japan

[Page 112] diagnostic ultrasound system Systems Data No. MSDUS0037EAC V2.1 g ENE r A l TM Viamo shares its core imaging engine with Toshiba's pre - TM mium ultrasound platform Aplio XG to provide an unprec - edented level of imaging performance. It employs XBT TM transducers and supports Pulse Subtraction THI, provid - ing image quality comparable to that of premium-class systems. TM It is also possible to use Aplio/Xario -series transducers. Viamo starts up within 15 seconds after the power is turned ON. The slim pole-cart allows the system to be easily moved anywhere in the medical facility to perform high-quality examinations. The main unit, which can be detached from the cart by one-touch operation, is pow - SSA-640A ered by an internal battery. It is also possible to store images on hard disk or external media such as a USB flash drive. Viamo's elegant design minimizes the number of switches on the operating panel. In addition, the large 15-inch LCD observation monitor also functions as a touchscreen. The buttons displayed on the screen can be touched with a fin - gertip, ensuring intuitive operation. SSA-640A+UZWT-640A SSA-640A+UZWT-640A+UZWT-641A

[Page 113] S y S t EM MA trix of SSA-640A u nit m odel name r emarks Main unit SSA-640A Laptop style ultrasound system including 15-inch LCD, Color Doppler, Pulse Subtraction THI, TM TM Viamo PWD, ADF, ApliPure , Quick Scan, TwinView , standard battery, AC power adaptor <Option> Pole-cart UZWT-640A Pole-type cart on which the main unit and a printer can be mounted Tablet kit UZWT-641A Kit for mounting the system main unit on the UZWT-640A in tablet mode Reference signal unit UJUR-640A Unit for displaying the ECG waveform. The ECG cable is included. Transducer selector UIPS-640A Unit for connecting both a slim-connector-type transducer and a transducer compatible with Aplio/Xario simultaneously to Viamo and switching between them Solid-State Drive UISD-640A Solid-state drive that can be mounted in place of the HDD AC adaptor UEAA-640A AC power adaptor (100-120 V, 220-240 V) for the main unit. An AC adaptor is supplied with the main unit as standard. Battery pack UEBP-640A Standard-capacity battery pack. The system can be operated continuously for approximately 30 minutes using this battery. A battery pack is supplied with the main unit as standard. UEBP-641A Large-capacity battery pack. The system can be operated continuously for approximately 1 hour using this battery. Double-speed UEBC-640A External quick charger for the battery pack. This charger can charge one or two spare battery charger batteries at one time. Transducer adaptor UITC-640A Connector conversion adaptor for connecting Aplio/Xario-compatible transducers to Viamo Printer support kit UEPS-641A Power unit and signal cable (for 220-240 V) for connecting a B/W printer to Viamo UEPS-642A Power unit and signal cable (for 110-120 V) for connecting a B/W printer to Viamo DICOM USDI-641A Kit for adding "Storage to server, MWM, MPPS". t r ANSDUCE r o ptio NS m lti-Freq. t H i Freq. Pulse Pulse t rape- m odel name s can type B-mode t H i Q s P B-P s P ad F a pliPure r emarks ( m Hz) s ubtraction s ubtraction zoid ( m Hz) ( m Hz) on o FF Slim con - PVT-375ST Convex 70° 3.5 6.0 4.0 1.9 6.0 5.0 4.0 –      nector type UITC-640A PVT-674BT Convex 65° 6.0 9.2 6.0 3.6 8.0 7.0 6.0 –     is required Slim con - PLT-704ST Linear 38 mm 7.5 11.0 8.6 6.2 8.4 7.6 6.2 –      nector type UITC-640A PLT-704AT Linear 38 mm 7.5 11.0 8.6 6.2 8.4 7.6 6.6 –      is required UITC-640A PLT-805AT Linear 58 mm 8.0 12.0 10.0 6.2 9.0 8.4 6.6 –      is required UITC-640A PLT-1204BT Linear 38 mm 12.0 14.0 12.0 8.0 14.0 10.0 7.0 –      is required UITC-640A PLT-705BTH Linear 46 mm 7.0 11.0 8.0 6.0 8.4 6.6 5.0 –      is required UITC-640A PVT-745BTV Convex 40° 7.0 11.0 8.0 6.0 9.0 7.6 5.8 –     is required UITC-640A PVT-350BTP Convex 70° 3.5 6.0 4.0 1.9 6.0 5.0 3.0 –      is required UITC-640A PVT-661VT Convex 160° 6.0 8.8 5.8 3.6 8.0 7.2 5.6 –     is required UITC-640A PVT-382BT Convex 80° 3.5 5.5 3.7 1.8 5.0 3.8 2.8 –      is required Slim con - PST-25ST Sector 90° 2.5 4.2 3.0 1.8 4.4 4.0 3.0 2.0       111 nector type

[Page 114] blo C k C h A rt S y S t EMS S p EC ifi CA tio NS System Viamo • Scan methods: Linear scan (including oblique and trapezoid) Main unit SSA-640A Sector scan Convex scan Battery pack Battery pack* • Monitor: 15-inch LCD with touch screen UEBP-640A UEBP-640A – XGA (1024 × 768) UEBP-641A – Monitor tilt range: 0° to 180° – Monitor rotation: Right 180° maximum AC adaptor Left 90° maximum UEAA-640A – Tablet mode: Available • Transducer ports: Double-speed – One for slim connector type on main unit. battery charger – Two (One for slim connector type, one for normal) are UEBC-640A available (UIPS-640A is required). • Protocol registration TM Transducer adaptor (SonoSet ): Available UITC-640A B-mode Transducer • Viewing depth PLT-805AT PVT-382BT etc. The viewing depth differs depending on the transducer used. Minimum depth: 2 cm Printer support kit Maximum depth: 28 cm UEPS-641A • Line density UEPS-642A L, M, H (can be preset) B/W printer • Scan angle and scan width UP-D897, P95D – Adjustment of scan angle (scan width) is possible. – Adjustment of scan steering (scanning position) is pos - Pole-cart sible. UZWT-640A – Adjustment of linear scan steering is possible. • PAN/EXPAND Tablet kit Real-time PAN/EXPAND UZWT-641A – Scale can be enlarged or reduced by the encoder. – The panning position can be arbitrarily selected using the trackball. DICOM • Focus USDI-641A Transmission: Maximum 8 steps Reception: Continuous Reference signal unit Auto-focusing: Available UJUR-640A • Transmission frequency Multi-frequency: Maximum 7 types (including THI) Tranceducer selector • B-mode image quality adjustment UIPS-640A – Dynamic range – Edge enhancement Solid-State Drive – Time-smoothing (persistence) UISD-640A – Auto gain control – Postprocessing • Gain: Display brightness for B-mode display can be changed. • STC: 8-step slide controls (common * Only a single battery can be installed at one time. to B and M modes) • Acoustic output adjustment: Adjustable up to 100% (19 steps) • Color Palette: 5 types

[Page 115] • THI (Tissue Harmonic Imaging) Color Doppler – Pulse Subtraction THI: Available • Color Doppler mode • Display orientation: Rotation is possible. – CDI mode Left/right reversal is possible. · Flow velocity • Quick Scan: Quick Scan enables automatic · Flow velocity/variance gain and STC control for · Power TM B-mode. – Advanced Dy NAMIC F LOW • Parallel processing: OFF/PSP · Directional can be displayed • Compound Imaging: Compound Imaging in real time • Color Doppler velocity is available (ApliPure). range selection (C Scale): Up to 33 types M-mode • Color Doppler time • M-mode sweep speed: 4 steps smoothing • M-mode gain: Display brightness for M-mode (C Time-Smoothing): 3 types display can be changed. • Color Doppler frame interpolation (C Frame Interpolation) • M-mode image quality adjustment Automatically set according to the transducer information – M-mode dynamic range and selected exam conditions. – M-mode edge enhancement • Color Doppler – M-mode postprocessing baseline (C Baseline): ±8 steps • Color Palette: 5 types • Color reversal: Available • Balance between Spectrum Doppler B/W and color display: 13 types • Doppler mode: PWD (Pulsed-Wave Doppler) • Parallel color Doppler • Doppler pulse repetition processing: OFF/PSP/QSP frequency (PRF) • Color gain: 61 steps PWD: 1.3 kHz to 15.2 kHz • Color Doppler • Doppler scan: B/D simultaneous scan multi-frequency: 2 types D-only scan • Color Doppler line • Doppler sampling density: 3 types volume: 13 types • Color ROI (Region of Interest) • Sample shift: 0-24 cm Adjustment of color ROI position, size, and angle is possible. • Doppler filter: 10 steps • Doppler gain: 41 steps Reference signal (UJUR-640A is required) • Indication of Doppler The ECG waveform can be displayed on the monitor. spectrum direction: Display of the forward and back - • Signal: ECG (lead ΙΙ ) ward velocity spectrum can be reversed. • Doppler baseline shift (zero-shift): 9 types (±4 types) • Doppler audio: Stereo output (forward flow and backward flow) • Color Palette: 5 types • Display of Doppler scale: 2 types (velocity and Doppler shift frequency) • Doppler focus: Automatically follows the sample position. • Doppler angle mark display: Available • Oblique Doppler scan: Oblique scan is possible with some linear transducers. 2D 10° (1 step) CDI 30° (3 steps) PW 30° (3 steps) • Doppler multi-frequency: 2 types • Doppler sweep speed: 4 steps • Quick Scan: Quick Scan enables automatic adjustment of Doppler waveform. 113

[Page 116] Measurement functions Signal I/O • 2D-mode measurements • Transducer connectors – Distance: 8 CH – Transducer – Angle: 8 CH connectors: 1 – A rea and circumference • External video output signal (tracing, cross, ellipse, – DVI-I: 1 spline): 8 CH • USB: 2 channels – Volume (ellipse): 8 CH • Ethernet – Cross: 8 CH – 100 BT: 1 channel – Parallel: 8 CH – Joint: 8 CH Requirements for use – Mean IMT: 8 CH • Main unit – Trace length: 8 CH – Line voltage: 24 VDC – Thickness: 8 CH – Power capacity: 5.63 A – Circle: 8 CH • AC adaptor • M-mode measurements – Line voltage: 100 VAC to 120 VAC, – Distance: 8 CH 220 VAC to 240 VAC – Time: 8 CH – Line frequency: 50 Hz/60 Hz – Slope: 8 CH – Power capacity: 1.8 A to 1.4 A, – Heart rate (The mean 0.9 A to 0.8 A of 1 to 8 heart rates • Printer support kit (UEPS-641A) can be selected.): 8 CH – Line voltage: 220 V to 240 V • PW Doppler measurements – Line frequency: 50 Hz/60 Hz – Velocity: 8 CH – Power capacity: 1.98 A to 1.81 A – Acceleration: 8 CH • Printer support kit (UEPS-642A) – Time: 8 CH – Line voltage: 110 V to 120 V – Heart rate (The mean – Line frequency: 50 Hz/60 Hz of 1 to 8 heart rates – Power capacity: 3.95 A to 3.63 A can be selected.): 8 CH • Environmental requirements for use – Velocity trace: 8 CH – Temperature: 10°C to 35°C – Relative humidity: 35% to 85% (no condensation) Cine memory (mass-storage image memory) – Atmospheric pressure: 700 hPa to 1060 hPa • 2D: Maximum 511 frames • M-mode: 15/30/60/120 s Peripheral devices • CDI: Maximum 511 frames • B/W digital printer: Sony UP-D897 • PWD: 15/30/60/120 s Mitsubishi P95DW Recording functions Others • Printer (option) • Supported languages: English (UK), German, French, Black and white printer: Digital IF English (US), Italian, Spanish, • Storage & Archiving Portuguese, Norwegian, Finnish, Hard disk drive Swedish, Russian Solid-State Drive (option) • Online help/manuals: Supported Memory: Device via USB port DICOM (USDI-641A is required) • Storage to server • MWM • MPPS

[Page 117] Safety classification Compliance • According to the type of protection against electric shock: • General CLASS I EQUIPMENT IEC60601-1 (1988), Amd. 1 (1991), Amd. 2 (1995) • According to the degree of protection against electric shock: • Particular EQUIPMENT WITH T y PE-BF APPLIED PARTS IEC60601-2-37 Ed1.1 (2004), Amd. 2 (2005) (Transducer, Reference signal unit) • Acoustic Power • According to the degree of protection against harmful Information for Manufacturers Seeking Marketing ingress of water: Clearance of Diagnostic Ultrasound Systems and Ordinary EQUIPMENT (enclosed EQUIPMENT without Transducers (2008) (FDA guidance) protection against ingress of water) • Electromagnetic Compatibility (EMC) • According to the degree of safety of application in the IEC60601-1-2 (2001), Amd. 1 (2004) presence of a FLAMMABLE ANESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE: EQUIPMENT not suitable for use in the presence of a FLAMMABLE ANESTHETIC MIXTURE WITH AIR or WITH OX y GEN OR NITROUS OXIDE • According to the mode of operation: CONTINUOUS OPERATION D i MENS io NS , MASS , AND pow E r C o NSUM ptio N e xternal dimensions m ass Power consumption u nit m odel name mm (in) kg (lb) (V a ) (approx.) Width Height d epth (approx.) Main unit SSA-640A 350 99 398 8.2 0.2 kVA (13.8) (3.9) (15.7) (18.1) Main unit + Pole-cart SSA-640A + UZWT-640A 550 750 550 26 0.2 kVA (21.7) (29.5) (21.7) (57.3)

[Page 118] MASS m odel name n ame of component m ass [kg] (lb) m odel name n ame of component m ass [kg] (lb) System main unit Transducers SSA-640A Viamo 8.2 (18.1) PLT-704AT Linear transducer 0.85 (1.9) Options/Accessories for main unit PLT-704ST Linear transducer 0.6 (1.3) P95DW B/W printer 2.6 (5.7) PLT-705BTH Linear transducer 0.85 (1.7) UEAA-640A AC adaptor 1.2 (3.2) PLT-805AT Linear transducer 0.85 (1.9) Double-speed PLT-1204BT Linear transducer 0.85 (1.9) UEBC-640A 1.7 (3.7) battery charger PST-25ST Sector transducer 0.5 (1.1) UEBP-640A Battery pack 1 (2.2) PVT-350BTP Convex transducer 0.95 (2.1) UEBP-641A Battery pack 1.85 (4.1) PVT-375ST Convex transducer 0.6 (1.3) UEPS-641A Printer support kit 4.5 (9.9) PVT-382BT Convex transducer 0.8 (1.8) UEPS-642A Printer support kit 4.5 (9.9) PVT-661VT Convex transducer 1 (2.2) UIPS-640A Transducer selector 2.5 (5.5) PVT-674BT Convex transducer 0.9 (2.0) UISD-640A Solid-State Drive 0.15 (0.33) PVT-745BTV Convex transducer 0.78 (1.7) UITC-640A Transducer adaptor 0.9 (2.0) UJUR-640A Reference signal unit 0.9 (2.0) UP-D897 B/W printer 2.6 (5.7) USDI-641A DICOM - UZWT-640A Pole-cart 17 (37.5) UZWT-641A Tablet kit 12 (26.5)

[Page 119] Toshiba Medical Systems Corporation meets internationally recognized standards for Quality Management System ISO 9001, ISO 13485. Toshiba Medical Systems Corporation Nasu Operations meets the Environmental Management System standard, ISO 14001. ©Toshiba Medical Systems Corporation 2009 all rights reserved. Made for Life, Viamo, Aplio, Xario, Pulse Subtraction, DYNAMIC FLOW, Design and specifications subject to change without notice. TwinView, SonoSet, and ApliPure are trademarks of Toshiba Medical 2009-12 TME/KI Systems Corporation. 117 Printed in Japan

[Page 120] ULTRASOUND LINEAR, CONVEX AND PHASED ARRAY TRANSDUCERS Product Data No. MPDUS0010EAG T-series T ransducers GENERAL DESCRIPTION TM TM The T-series transducers have been developed specially for the super premium ultrasound system, Artida , Aplio XG, TM TM Xario XG, Xario, and Viamo . These transducers are ergonomically designed with innovative shapes, making them comfortable to hold and facilitating good contact with the surface of the patient's body. By using a high-precision ceramic material that supports the new drive method, these transducers provide high Doppler sen - sitivity and high image quality in B-mode. This series includes special transducers that support the Dynamic Micro Slice function for high-definition imaging. P s T-25BT PVT-375BT PVT-575MV PLT-805 a T

[Page 121] APPLICATION TABLE OF TRANSDUCERS Model name Radiology Cardiology OB/GYN Urology Special application Special procedure Liver, Trans- Trans- Trans- Endo- Trans- Endo- Superficial tissue Neonatal Neuro- Trans- Intra- Gallbladder, thoracic esophageal abdominal vaginal vesical rectal head surgery cranial operative Peripheral Small Pancreas, echocardio- echocardio- vessels parts Kidney, etc. graphy graphy 1 1 PST-20CT Δ* Δ Δ*  PST-25AT  PST-25BT Δ   PST-25ST   PST-25SX  PST-30BT Δ  Δ PST-30SBT Δ  Δ PST-37CT    PST-50AT   PST-65AT   PET-508MA  PET-510MA*  PET-510MB*  PET-511BTM  PLT-308P* Δ Δ PLT-604AT   PLT-704AT   PLT-704ST   PLT-704SBT   PLT-705BTH Δ Δ  PLT-705BTF* Δ Δ  PLT-805AT   PLT-1202S    PLT-1204AT   PLT-1204AX   PLT-1204BT   PLT-1204BX   PLT-1204MV   PVT-350BTP  PVT-375AT    PVT-375BT    PVT-375ST    PVT-382BT*    PVT-382MV  Δ PVT-375MV   PVT-575MV  PVT-661VT   PVT-674BT    Δ PVT-681MV   PVT-770RT  PVT-745BTV Δ    : Highly recommended  : Recommended Δ: Available Blank: Not recommended *1: Not available in the USA *2: Not available except in the USA

[Page 122] TABLE OF COMPATIBIL I T y BET w EEN TRANSDUCER AND BIOPS y GUIDE ADAPTER Biopsy adapters manufactured by CIVCO are used with the T-series transducers. The table below shows the supported model names. For details of these biopsy adapters, refer to the documents provided by CIVCO. Biopsy adapters Model name CIVCO TOSHIBA Bracket Replacement kit Biopsy adapters PST-20CT – – – PST-25AT 680-086 610-608 – PST-25BT 680-086 610-608 – PST-25ST 680-086 610-608 – PST-25SX – – – PST-30BT 680-086 610-608 – PST-30SBT 680-086 610-608 – PST-37CT 680-089 610-608 – PST-50AT – – – PST-65AT – – – PET-508MA – – – PET-510MA – – – PET-510MB – – – PET-511BTM – – – PLT-308P – – UAGL004A(*) PLT-604AT 680-087 610-608 – PLT-704AT 680-087 610-608 – PLT-704ST 680-087 610-608 – PLT-704SBT 680-087 610-608 – PLT-805AT 680-090 610-608 UAGV-022A PLT-705BTH – – UAGV020A PLT-705BTF – – UAGV020A PLT-1202S – – – PLT-1204AT 680-088 610-608 – PLT-1204AX 680-088 610-608 – PLT-1204BT 680-088 610-608 – PLT-1204BX 680-088 610-608 – PLT-1204MV – – UAGL-015A PVT-350BTP – – UAGV-030A(*) PVT-375AT 680-085 610-608 – PVT-375BT 680-085 610-608 – PVT-375ST 680-085 610-608 – PVT-382BT – – UAGV-027A PVT-382MV – – UAGV-032A PVT-375MV – – UAGV-033A PVT-575MV – – – PVT-661VT – – UAGV-024A PVT-681MV – – UAGV-031A PVT-674BT – – UAGV-028A PVT-745BTV – – UAGV-029A PVT-770RT 680-093 680-092 UAGV-023A ( ) * : Supplied with the transducer

[Page 123] T ABLE OF COMPATIBILIT y BET w EEN TRANSDUCER AND UNIT Model name SSH-880CV SSA-790A SSA-780A SSA-770A SSA-700A SSA-680A SSA-660A SSA-640A PST-20CT – –      – PST-25AT – – –   – – – PST-25BT –       – PST-25ST – – – – – – –  PST-25SX  – – – – – – – PST-30BT        – PST-30SBT  – – – – – – – PST-37CT – – –   – – – PST-50AT –       – PST-65AT –       – PET-508MA – –      – PET -510 MA –       – PET -510 MB –       – PET-511BTM   (V2.0 or later) – – –  (V1.1 or later)  (V6.1 or later) – PLT-308P – –      – PLT-604AT –       – PLT-704AT –       – PLT-704ST – – – – – – –  PLT-704SBT   (V2.0 or later)  – –   (V6.0 or later) – PLT-705BTH –  (V3.0 or later)  – –   – PLT-705BTF –  (V3.0 or later)  – –   – PLT-805AT –        (*) PLT-1202S –       – PLT-1204AT –     –  – PLT-1204AX –  –  –  – – PLT-1204BT –  (V3.0 or later)  – –  (V2.0 or later) – – PLT-1204BX –  (V3.0 or later) – – – – – – PLT-1204MV –  (V2.0 or later)  – –  – – PVT-350BTP –       – PVT-375AT – – –   – – – PVT-375BT –       – PVT-375ST – – – – – – –  PVT-382BT –        (*) PVT-382MV –  (V2.0 or later)  – –  (V1.1 or later) – – PVT-375MV –  (V4.0 or later)  – –  (V3.0 or later)  (V8.0 or later) – PVT-575MV –   – –   – PVT-661VT –       – PVT-674BT –       – PVT-681MV –  (V2.0 or later)  – –   (V6.0 or later) – PVT-745BTV –       – PVT-770RT –       –  : Compatible – : Not compatible *: The transducer conversion adapter UITC-640A is required. Note: Only versions released in 2007 or later are shown.

[Page 124] PST-20CT PST-37CT PST-25AT PST-25BT PST-25ST PST-25SX PST-30BT PST-30SBT PST-50AT PST-65AT Frequency MHz 2.0 3.5 2.5 2.5 2.5 2.5 3.0 3.0 5.0 6.5 Actual viewing mm – – – – – – – – – – width (in) Actual viewing angle Approx. 90° Approx. 90° Approx. 90° Approx. 90° Approx. 90 ° Approx. 90° Approx. 90° Approx. 90° Approx. 90° Approx. 90° mm 70 80 80 80 80 80 80 50 35 Focal length Variable (in) (2.8) (3.1) (3.1) (3.1) (3.1) (3.1) (3.1) (2.0) (1.4) PET-510MA/ PET-508MA PET-511BTM PLT-308P PLT-604AT PLT-704AT PLT-704ST PLT-704SBT PLT-705BTH PLT-705BTF MB Frequency MHz 5.0 5.0 5.0 3.75 6.0 7.5 6.8 6.8 7.0 7.0 Actual viewing mm 38 38 38 38 46 46 – – – 85 width (in) (1.5) (1.5) (1.5) (1.5) (1.8) (1.8) Actual viewing angle Approx. 90° Approx. 90° Approx. 90° – – – – – – – mm 47 60 60 60 60 20 25 25 35 35 Focal length (in) (1.9) (2.4) (2.4) (2.4) (2.4) (0.8) (1.0) (1.0) (1.4) (1.4) PLT-805AT PLT-1202S PLT-1204AT PLT-1204AX PLT-1204MV PLT-1204BT PLT-1204BX PVT-350BTP PVT-375AT PVT-375BT Frequency MHz 8.0 12.0 12.0 12.0 12.0 12.0 12.0 3.5 3.5 3.5 Actual viewing mm 58 25 38 38 38 38 38 – – – width (in) (2.3) (1.0) (1.5) (1.5) (1.5) (1.5) (1.5) Actual viewing angle – – – – – – – Approx. 70° Approx. 70° Approx. 70° mm 20 15 13 19 10 19 19 80 80 80 Focal length (in) (0.8) (0.6) (0.5) (0.7) (0.4) (47.5) (47.5) (3.1) (3.1) (3.1) PVT-375ST PVT-382BT PVT-382MV PVT-375MV PVT-575MV PVT-661VT PVT-674BT PVT-681MV PVT-745BTV PVT-770RT Frequency MHz 3.5 3.5 3.5 3.5 5.0 6.0 6.0 6.0 7.0 7.0 Actual viewing mm – – – – – – – – – – width (in) Actual viewing angle Approx. 70° Approx. 80° Approx. 82° Approx. 73 ° Approx. 73° Approx. 160° Approx. 65° Approx. 160° Approx. 40° Approx. 170° mm 80 80 55 50 55 30 60 18 35 25 Focal length (in) (3.1) (3.1) (2.2) (2.0) (2.2) (1.2) (2.4) (0.7) (1.4) (1.0) AMBIENT CONDITIONS I NFECTION CONTROL Use and store the transducers under the following environ - High-level disinfection or sterilization can be used for the mental conditions: transducers. • Temperature: 5°C to 40°C (41°F to 104°F) For details of the applicable disinfection methods and steri - • Relative humidity: 30% to 85% (No condensation) lization methods, refer to Guideline for cleaning, disinfection • Atmospheric pressure: 700 hPa to 1,060 hPa and sterilization of transducers. * PVT-575MV, PVT-382MV, PVT-681MV, PLT-1204MV, When a transesophageal transducer, endocavitary trans - PVT-375MV ducer, or intraoperative transducer is to be used, it is rec - • Temperature: 20°C to 40°C (68°F to 104°F) ommended that a transducer sheath be applied over it in order to reduce the risk of infection. * PET-511BTM • Temperature: 10°C to 35°C (50°F to 95°F) • Relative humidity: 35% to 85% (No condensation) • Atmospheric pressure: 700 hPa to 1,060 hPa * PST-25ST, PVT-375ST, PLT-704ST • Temperature: 10°C to 35°C (50°F to 95°F) • Relative humidity: 30% to 85% (No condensation) • Atmospheric pressure: 700 hPa to 1,060 hPa

[Page 125] 36 42 52 23 29 P s T-20 c T 36 43 52 17 29 P s T-37 c T Unit: mm (in) 123

[Page 126] 23 34 17 27 P s T-25 a T 23.8 34 35.7 52 17 27 P s T-25BT/P s T-30BT Unit: mm (in) 124

[Page 127] 23±1 35.7±1 7±1 143 31 27±1 65 17±1 1,950 34±1 91±2 Mass: Approx. 0.5 kg (1.1 lb) P s T-25 s T 25.6 44.6 8.3 52.5 20 35.6 152.8 2,300±10% 34 113.2 Mass: Approx. 1.3 kg (2.9 lb) P s T-25 s X 23.8±1 35.7±1 18.8±1 23.8±1 7±1 117±2 1,950 34±1 88±2 P s T-30 s BT Unit: mm (in) 125

[Page 128] 19 33 52 14 27 Mass: Approx. 0.75 kg (1.7 lb) P s T-50 a T 17 25 6.5 52 9 21 117 2,200±10% 23 63 Mass: Approx. 0.7 kg (1.5 lb) P s T-65 a T Unit: mm (in) 126

[Page 129] Waterproof section Overall length 1,410 ± 5% A/P angle knob lock lever Insertion section length 1,070 ± 5% Insertion tube Piezoelectric element Left 90° ± 5° Rotation angle 0° to 180° Right 90° ± 5° Operating section Piezoelectric element Posterior 90° ± 5° rotation switch Transducer tip A/P angle knob Anterior 120° +10° Suspension ring Bending section -5° L/R angle knob 9.4 ± 0.3 Cable length 2,000 ± 150 117 Connector Transducer cable 139 Mass: Approx. 1.5 kg (3.3 lb) P e T-511BTM Waterproof section Overall length 1,260 ± 10% U/D angle lock release knob Insertion section length 1,020 ± 10% U/D angle knob +10° Insertion tube Transducer tip UP 120° -5° DOWN 90° ± 5° Operating section Ultrasound element Ultrasound element rotation knob Rotation angle 0° to 180° ± 10° Bending section 9.2 ± 0.2 Cable length 2,000 ± 10% 117 Connector Transducer cable Mass: Approx. 1.25 kg (2.8 lb) P e T-510M a Unit: mm (in) 127

[Page 130] Waterproof section Overall length 1,260 ± 10% Insertion section length 1,020 ± 10% DOWN 90° ± 5° Insertion tube Transducer tip UP 120° +10° U/D angle lock release knob 9.2 ± 0.2 -5° FREE DOWN φ U/D angle knob Ultrasound element Rotation angle 0° to 180° ± 10° UP Operating section Bending section Ultrasound element rotation knob Cable length 2,000 ± 10% 117 Connector Transducer cable Mass: Approx. 1.25 kg (2.8 lb) P e T-510MB 10.7 Transducer cable Transducer head Transducer rotation knob Bending section U/D angle knob Operating section Tip Connector Conducting section 7.9 68 ± 10% 117 175 ± 10% 900 ± 10% Mass: Approx. 1.2 kg (2.6 lb) P e T-508M a Unit: mm (in) 128

[Page 131] 46 60 52 17 30 117 1,950±10% 34 100 Mass: Approx. 0.9 kg (2.0 lb) PLT-604 a T 46 60 52 30 117 1,950±10% 34 100 Mass: PLT-704AT: Approx. 0.85 kg (1.9 lb) PLT-704SBT: Approx. 0.9 kg (2.0 lb) PLT-704 a T/PLT-704 s BT Unit: mm (in) 129

[Page 132] 46±1 60±1 8±1 143 31 13±1 30±1 1,950 34±1 100±1 Mass: Approx. 0.6 kg (1.3 lb) PLT-704 s T 67 71 12 26 117 1,950±10% 34 90 PLT-805 a T Unit: mm (in) 130

[Page 133] 51 57 2,650 53 Mass: Approx. 0.78 kg (1.7 lb) PLT-705BTH 2,650 71 Mass: Approx. 0.78 kg (1.7 lb) PLT-705BTF Unit: mm (in) 131

[Page 134] 6.5 19 52 9 15 117 2,800±10% 143 PLT-1202 s 48 60 10 30 117 1,950±10% 34 100 PLT-1204 a T Unit: mm (in) 132

[Page 135] 48 60 52 30 117 1,950±10% 34 132 PLT-1204 a X 44.8±1 54.1±1 10±1 27.6±1 117 1,950±10% 34 101±2 PLT-1204BT Unit: mm (in) 133

[Page 136] 43.3±1 54.1±1 8.8±1 28.1±1 117 1,950±10% 34±1 127.6±2 Mass: Approx. 0.92 kg (2.0 lb) PVT-1204BX 72 77 52 17 33 117 1,950±10% 34 115 PVT-375 a T Unit: mm (in) 134

[Page 137] 72 77 52 16 28 117 1,950±10% 34 115 PVT-375BT 72±1 77±1 8±1 143 31 16±1 28±1 1,950 34±1 115±2 Mass: Approx. 0.6 kg (1.3 lb) PVT-375 s T Unit: mm (in) 135

[Page 138] 29 34 52 15 20.6 117 1,950±10% 34 102 PVT-382BT 49 57 52 15 28.4 117 1,950±10% 34 100 Mass: Approx. 0.9 kg (2.0 lb) PVT-674BT Unit: mm (in) 136

[Page 139] 13.9 19.8 6.5 117 2,650±10% 64.2 52 36.5 38.5 Mass: Approx. 0.78 kg (1.7 lb) PVT-745BTV 52 24 φ 10 117 2,250±10% 30 315 Mass: Approx. 1.0 kg (2.2 lb) PVT-661VT Unit: mm (in) 137

[Page 140] 139 End-firing section Transverse section 9.8 11.5 φ φ φ 117 400±10% 1,800±10% 363 Mass: Approx. 2.0 kg (4.5 lb) PVT-770 r T 70 (1.23) 15° 108 10° 10° 5 25° 10° (22.3) 32.9 34.7 25 52 17 25 117 2,300±10% PLT-308P Unit: mm (in) 138

[Page 141] 54.8 61.7 83.9 39.3 52 16.4 19 8.2 117 1,950±10% 134 PVT-350BTP 2,250±225 41.7 117.7 83.4 7.5 52 139 Mass: Approx. 1.1 kg (2.4 lb) PVT-375MV Unit: mm (in) 139

[Page 142] 7.5 87 450±10% 87.6 7 28.1 41 136.6 52 55.6 100 25 1,950±10% Mass: Approx. 1.26 kg (2.8 lb) PVT-575MV 39.2 41.6 2,250±225 42.5 145.4 Mass: Approx. 1.04 kg (2.3 lb) PVT-382MV Unit: mm (in) 140

[Page 143] T-series T ransducers MPDUS0010EAG 59.6 8.7 73.7 2,250±250 42.2 131.7 Mass: Approx. 1.23 kg (2.7 lb) PLT-1204MV 25.5 2,400±240 38.5 320.9 Mass: Approx. 1.15 kg (2.5 lb) PVT-681MV Unit: mm Toshiba Medical Systems Corporation meets internationally recognized standards for Quality Management System ISO 9001, ISO 13485. Toshiba Medical Systems Corporation Nasu Operations meets the ©Toshiba Medical Systems Corporation 1997-2009 all rights reserved. Environmental Management System standard, ISO 14001. Design and specifications subject to change without notice. Made for Life, Artida, Aplio, Xario, and Viamo are trademarks of Toshiba 2009-9 TME/KI Medical Systems Corporation. 141 Printed in Japan

[Page 144] UL No.: MPIUS0413EA Issued by: Hiroyuki Tsujino Date: March 31, 2009 General Manager RELEASE OF NEW PRODUCT VIAMO Viamo, a new product that features both outstanding portability and high image quality comparable to that of premium-class systems, will be released in April 2009. Viamo = Versatile Imaging with Advanced Mobility 1/4 COMPANY CONFIDENTIAL

[Page 145] 1. Features of Viamo Viamo shares its core imaging engine with Toshiba's premium ultrasound platform Aplio XG to provide an unprecedented level of imaging performance. It employs XBT transducers and supports Pulse Subtraction THI, providing image quality comparable to that of premium-class systems. It is also possible to use Aplio/Xario-series transducers. Viamo starts up within 15 seconds after the power is turned ON. The slim pole-cart allows the system to be easily moved anywhere in the medical facility to perform high-quality examinations. The main unit, which can be detached from the cart by one-touch operation, is powered by an internal battery. It is also possible to store images on hard disk or external media such as a USB flash drive. Viamo's elegant design minimizes the number of switches on the operating panel. In addition, the large 15-inch LCD observation monitor also functions as a touchscreen. The buttons displayed on the screen can be touched with a fingertip, ensuring intuitive operation. 2/4 COMPANY CONFIDENTIAL

[Page 146] 2. Sales strategies Viamo's main target is the radiology market. This system is therefore very effective in negotiations with customers who are already using Aplio/Xario-series systems or those who would like to purchase a compact and portable model as part of a package deal with Aplio XG/Xario-series systems. In either case, important selling points are Viamo's compatibility with Aplio/Xario-series transducers and its high image quality (diagnostic capabilities), comparable to that of Aplio XG/Xario-series systems. 3. System configuration and main system specifications (1) Main unit Model: SSA-640A Configuration: Main unit (including 15-inch LCD, standard battery pack, and AC adapter) * The transducer and table are not included in the standard system configuration. 3/4 COMPANY CONFIDENTIAL

[Page 147] (2) Compatible transducers The following transducers can be connected to Viamo. • Viamo transducers Transducers specifically designed for Viamo, which employs a slim-type transducer connector − PVT-375ST Abdominal convex transducer (equivalent to PVT-375BT) − PLT-704ST Linear transducer for vessels and superficial tissues (equivalent to PLT-704SBT) − PST-25ST Cardiac sector transducer (equivalent to PST-25BT) • Aplio/Xario-series transducers − PLT-805AT: Linear transducer for the breast and superficial tissues − PVT-382BT: Transducer for the abdomen and biopsy procedures (3) Main system specifications • Scanning methods: Convex Linear (including oblique and trapezoid) Sector • Observation monitor: 15-inch LCD (touchscreen) Tilt, swivel, and tablet mode supported. • Imaging modes: B (including Pulse Subtraction THI), M, CDI, Power, PWD • Gain adjustment: B gain, STC, QuickScan • Image storage: Internal HDD, USB flash drive • External dimensions: 350 mm (W) × 99 mm (H) × 398 mm (D) • Mass: Approximately 8.2 kg (4) Options Pole-cart UZWT-640A Pole-type cart on which the main unit and a printer can be mounted. AC adaptor UEAA-640A Power adapter for the main unit (100 to 240 VAC). One adapter is supplied in the standard system configuration. Battery pack UEBP-640A Standard-capacity battery pack. Permits continuous operation for approximately 30 minutes. One battery pack is supplied in the standard system configuration. UEBP-641A Large-capacity battery pack. Permits continuous operation for approximately 1 hour. Battery charger UEBC-640A External quick charger for battery packs. Up to two spare battery packs can be charged externally at one time. Transducer adaptor UITC-640A Connector conversion adapter for connection of Aplio/Xario-series transducers to Viamo. Printer support kit UEPS-641A Power unit and signal cable for connection of a B/W printer to Viamo (for 220 to 240 VAC). UEPS-642A Power unit and signal cable for connection of a B/W printer to Viamo (for 110 to 120 VAC). B/W Printer: Sony UP-D897 Mitsubishi P95D 4/4 COMPANY CONFIDENTIAL

[Page 148] UL No.: MPIUS0420EA Issued by: Shuichi Kawasaki Date: May 27, 2009 General Manager RELEASE OF VIAMO V1.2 From production in May 2009, Viamo (SSA-640A) will be V1.2. 1. Major changes The DICOM option (storage to server) is added. Model name: USDI-640A Applicable systems: SSA-640A with system software V1.2 Composition: No media (such as CD) is supplied, as this kit is provided in electronic license version. 2. Upgrade kit The SSA-640A already used at sites can be upgraded to V1.2 using the following upgrade kit. Model: USBU-640A Applicable systems: SSA-640A with system software V1.1 Composition: System software (USB flash memory) 1 Manual and label 1 set 1/1 COMPANY CONFIDENTIAL

[Page 149] UL No.: MPIUS0428EAA Issued by: Shuichi Kawasaki Date: November 5, 2009 General Manager VIAMO V2.0 Viamo (SSA-640A) will be V2.0 from production in November 2009. Major changes • Support of additional transducers • Addition of new DICOM functions (option). • Support of tablet mode (option) • Other new functions 1. Details of changes (1) Support of additional transducers The following transducers can be connected to the system. High-frequency linear transducer PLT-1204BT High-frequency linear transducer PLT-704AT Endovaginal transducer PVT-661VT High-frequency convex transducer PVT-674BT Intraoperative linear transducer PLT-705BTH Intraoperative convex transducer PVT-745BTV Biopsy transducer PVT-350BTP * The transducer conversion adapter UITC-640A is required in order to connect these transducers. (2) Addition of new DICOM functions The following DICOM functions can be used by installing the new DICOM kit USDI-641A/EL. • Storage to a server (same function as provided by USDI-640A) • MWM • MPPS 1/2 COMPANY CONFIDENTIAL

[Page 150] * There are no changes in the functions provided by the conventional DICOM kit USDI-640A. * USDI-640A and USDI-640A/EL are provided as electronic license versions. No CDs or other media are used for installation. * The serial number and the System ID of the Viamo system main unit is required if this option is ordered separately. Model name: USDI-641A/EL Applicable system: SSA-640A V2.0 Composition: Manual and label 1 set (3) Support of tablet mode The Viamo system can be configured for use in tablet mode and mounted to the pole cart (UZWT- 640A) using the following kit. • In tablet mode, the operating panel is removed and the touch panel is used for all system operations. Model: UZWT-641A Applicable system: SSA-640A + UZWT-640A Composition: Tablet unit, monitor hook, inner pipe (L), weight, joint, metal fittings, cable hook, clamps, caps, screws, label, manual (4) Other new functions • Advanced Dynamic Flow (ADF) • ApliPure (frequency compounding only) • Quick Scan for Doppler • TwinView • Pulse Subtraction with three frequencies 2. Upgrade kits Viamo systems already installed at sites can be upgraded to V2.0 using the following upgrade kit. Model name: UIBU-640A/A1 (For the USA and regions with line voltages near 100 V) UIBU-640A/E1 (For Europe and regions with line voltages near 200 V) UIBU-640A/J1 (For Japan) Applicable systems: SSA-640A V1.1 and V1.2 2/2 COMPANY CONFIDENTIAL

[Page 151] UL No.: MPIUS0433EA Issued by: Shuichi Kawasaki Date: November 13, 2009 General Manager HOW TO ORDER SOFTWARE OPTIONS FOR VIAMO AND ARTIDA (NOT FOR TAMS OR TMSE ) This document describes the method for ordering software options for Viamo and Artida systems. 1. Applicable items (1) For Viamo USDI-640A (V1.1 DICOM) USDI-641A (V1.2 DICOM) (2) For Artida USVC-880A Cardiac 4D USWT-880A Wall Motion Tracking USSE-880A Stress Echo USTE-880A Tissue Enhancement USHI-880A Contrast Harmonic Imaging USDI-880A DICOM 2. Ordering method If an option listed above is ordered separately, provide the serial number of the Viamo/Artida system main unit and the system ID. Orders cannot be accepted unless the main unit of the Viamo/Artida system is identified (when serial number or system ID is not provided). 1/1 COMPANY CONFIDENTIAL

[Page 152] UL No.: MPIUS0435EAB Issued by: Shuichi Kawasaki Date: November 19, 2009 General Manager RELEASE OF VIAMO V2.1 System software V2.1 will be installed in Viamo (SSA-640A) systems produced in December 2009 onward. 1. Outline of the changes (1) Support of an ECG unit (option) (2) Support of a Transducer selector unit (option) (3) Support of an SSD unit (option) (4) Support of the use of PLT-1204BT for THI 2. Details of the changes (1) ECG unit (option) This unit enables display of the ECG signal. Model: UJUR-640A Applicable systems: SSA-640A with V2.1 or later Lead type: Lead II Components: ECG waveform generation unit 1 ECG cable 1 Labels and manuals 1 set 1/2 COMPANY CONFIDENTIAL

[Page 153] (2) Transducer selector unit (option) This unit can be used to switch between a slim-type transducer (PST- 25ST, PVT-375ST, or PLT-704ST) and a transducer that is compatible with Aplio/Xario, which can be connected to this unit at the same time. The unit can be mounted to the pole cart or can be used as a stand-alone unit. Model: UIPS-640A Applicable systems: SSA-640A with V2.1 or later Components: Transducer selector unit 1 set Mounting parts for installing the unit on the pole cart 1 set Mounting parts for installing the unit as a stand-alone unit 1 set (In the example shown in the figure, this unit is mounted on the pole cart.) (3) SSD unit (option) An SSD (solid state drive) unit, which uses flash memory as the recording media, can be installed for use instead of the built-in hard disk drive. Since the SSD unit does not include moving parts, the read/write speed can be increased without compromising reliability, making it possible to approximately halve the cold-boot time (time required for start up from the power-OFF state) and the shutdown time. Model: UISD-640A Applicable systems: SSA-640A with V2.1 or later (excluding systems upgraded to V2.1 using the V2.1 upgrade kit.) Components: SSD unit 1 set Mounting parts 1 set Labels and manuals 1 set For systems with V2.0 or earlier, the following model must be ordered, because it includes the set of replacement PWBs required for use of this unit with such systems. Model: UISD-641A Applicable systems: SSA-640A with system software V1.2 or V2.0 Components: SSD unit 1 set Mounting parts 1 set BKE PWBs 1 set Labels and manuals 1 set 3. Upgrade kit Viamo systems already installed at sites can be upgraded to V2.1 using the following upgrade kit. Model: UIBU-641A Applicable systems: SSA-640A with V1.2 or V2.0 Components: HDDs 1 set Parts for reducing noise 1 set Labels and manuals 1 set 2/2 COMPANY CONFIDENTIAL