The GIF-2T1500's published specifications match the scope it follows, line for line. What the FDA record adds is narrower: two channels, one suction path, and an image chain that exists only on the current processor generation.
A probe that images has proved one thing: it works in one port. A VIVID E9 carries two connector generations, so the receiving slip has to name the port, the six inspection points and the state at arrival.
A component code names the part that was involved, not the cause. What an ultrasound service record has to carry so that someone else can code the event - and what the service side should not decide for the reporter.
A needle guide attaches to the probe, not to the console. Which is why the deciding field on a Siemens needle guide listing names a transducer: a field-by-field read, what wears on the reusable half, and what to send before you order.
A volumetric probe is either a matrix array steered in two axes or a mechanically swept array with a motor and a fluid path. Which one it is decides what fails, what the artifact looks like, and whether a repair route exists.
A probe can image perfectly and still fail its electrical safety test. The limit a leakage reading is judged against changes with the probe's applied-part class, the grounding condition and the mains voltage, and the manufacturer's own tables say so.